Comparison of Different Biaxial Tests for the Inverse Identification of Sheet Steel Material Parameters

被引：36
|
作者：
Schmaltz, S. [1 ]
Willner, K. [1 ]
机构：
[1] Univ Erlangen Nurnberg, Dept Mech Engn, Inst Appl Mech, D-91054 Erlangen, Germany
来源：
STRAIN | 2014年 / 50卷 / 05期
关键词：
anisotropy; computational plasticity; FEMU; parameter identification; sheet steel; TENSILE TESTS; METALS; OPTIMIZATION; COMPOSITE; BEHAVIOR;
D O I：
10.1111/str.12080
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The aim of this work is to compare different biaxial specimen geometries and loading conditions concerning their applicability as experimental database for an inverse finite element model updating procedure to identify the material parameters of sheet steel. Therefore, the deformation of the specimens is recorded with an optical, three-dimensional full-field deformation measurement system, and the utilised displacement data at the surface of the specimens are calculated via digital image correlation. The numerical material model for the simulations is based on a three-dimensional, anisotropic elasto-plastic ansatz and is implemented into a commercial finite element software code. The material parameters that are identified with the different specimen geometries are the hardening variables and the anisotropic plastic values. Based on the identification results, a selection criterion for the evaluation of specimen geometries for the inverse parameter identification is presented.
引用
收藏
页码：389 / 403
页数：15
相关论文
共 50 条
  • [1] IDENTIFICATION OF NONLINEAR KINEMATIC HARDENING PARAMETERS FOR SHEET METAL FROM BIAXIAL LOADING TESTS
    Soehngen, B.
    Willner, K.
    COMPUTATIONAL PLASTICITY XIV: FUNDAMENTALS AND APPLICATIONS, 2017, : 373 - 384
  • [2] Identification of material parameters of thin-walled steel tube by inverse method
    Liu, Dihui
    Wang, Chen
    Li, Guangyao
    Zhongguo Jixie Gongcheng/China Mechanical Engineering, 2008, 19 (06): : 688 - 690
  • [3] Identification of material parameters for thin sheets from single biaxial tensile test using a sequential inverse identification strategy
    P. A. Prates
    M. C. Oliveira
    J. V. Fernandes
    International Journal of Material Forming, 2016, 9 : 547 - 571
  • [4] Identification of material parameters for thin sheets from single biaxial tensile test using a sequential inverse identification strategy
    Prates, P. A.
    Oliveira, M. C.
    Fernandes, J. V.
    INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2016, 9 (04) : 547 - 571
  • [5] Identification of material parameters in constitutive model for sheet metals from cyclic bending tests
    Yoshida, F
    Urabe, M
    Toropov, VV
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1998, 40 (2-3) : 237 - 249
  • [6] COMPARISON OF TESTS FOR INSULATING COATINGS ON STEEL SHEET
    GODEC, Z
    IEEE TRANSACTIONS ON ELECTRICAL INSULATION, 1980, 15 (02): : 95 - 103
  • [7] Identification of Material Parameters of an Orthotropic Metal Sheet
    Vavrik, Daniel
    Fiala, Zdenek
    Grediac, Marco
    Jandejsek, Ivan
    Micka, Michal
    Minster, Jiri
    Pierron, Fabrice
    PROCEEDINGS OF THE 48TH INTERNATIONAL SCIENTIFIC CONFERENCE ON EXPERIMENTALNI ANALYZA NAPETI 2010 EXPERIMENTAL STRESS ANALYSIS, 2010, : 505 - 510
  • [8] Comparison of multiaxial fatigue parameters using biaxial tests of Waspaloy
    Sahadi, J. V.
    Paynter, R. J. H.
    Nowell, D.
    Pattison, S. J.
    Fox, N.
    INTERNATIONAL JOURNAL OF FATIGUE, 2017, 100 : 477 - 488
  • [9] Identification of sheet metal plastic anisotropy using heterogeneous biaxial tensile tests
    Teaca, M.
    Charpentier, I.
    Martiny, M.
    Ferron, G.
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2010, 52 (04) : 572 - 580
  • [10] Hybrid FE/ANN and LPR approach for the inverse identification of material parameters from cutting tests
    Ana Muñoz-Sánchez
    Isabel M. González-Farias
    Xavier Soldani
    M. Henar Miguélez
    The International Journal of Advanced Manufacturing Technology, 2011, 54 : 21 - 33
12345