Effects of specimen size and yttria concentration on mechanical properties of single crystalline yttria-stabilized tetragonal zirconia nanopillars

The nanoscale plastic deformation of yttria-stabilized tetragonal zirconia (YSTZ) is highly dependent on the crystallographic orientations, i.e., dislocation is induced when the loading direction is 45 degrees tilted to {111} and {101} slip planes, while tetragonal to monoclinic phase transformation dominates the plastic deformation when loading direction is perpendicular to the slip planes. This study investigates the effects of specimen size and yttria concentration on the mechanical response of single crystalline YSTZ nanopillars. Through uniaxial compression test, the smaller-is-stronger phenomenon is revealed in nanopillars deformed through a dislocation motion mechanism. Serrated stacking faults are observed in the smallest nanopillar, while neat primary slip plane forms in the largest nanopillar. In contrast, the larger-is-stronger relation is observed in nanopillars in which deformation is mediated by tetragonal to monoclinic phase transformation. It is noted that the ratio of transformed monoclinic phase to the remaining tetragonal phase is the highest in the smallest nanopillar. The strength of nanopillars is identified to decrease by increasing the amount of yttria due to the creation of more oxygen vacancies that act as weak points to facilitate dislocation motion and accelerate phase transformation. Published by AIP Publishing.