Experimental and Mechanism Research on EDM Combined with Magnetic Field

被引：6

作者：

Cao, Mingrang ^{[1
]}

Wang, Yanqing ^{[1
]}

Yang, Shengqiang ^{[1
]}

Li, Wenghui ^{[1
]}

机构：

[1] Taiyuan Univ Technol, Coll Mech Engn, Taiyuan 030024, Shanxi, Peoples R China

来源：

ADVANCES IN GRINDING AND ABRASIVE TECHNOLOGY XV | 2009年 / 416卷

关键词：

Magnetic field; Electrical discharge machining (EDM); Combined machining; Mechanism Research;

D O I：

10.4028/www.scientific.net/KEM.416.337

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The two disadvantages of EDM are the low material removal rate (MRR) and poor surface quality. In this investigation, EDM assisted by magnetic field (MFEDM) has been proposed for the first time to overcome above-mentioned disadvantages. Constant magnetic field was applied to the both sides of discharge channel perpendicularly to form a novel process. In experiment, EDM machine tool D703F was used to machine nonferromagnetic materials. The machining parameters discharge current and pulse duration were chosen to determine the effects on material removal rate and surface roughness. Experiment results indicate that the MRR of the combined machining is 1.2 similar to 3 times of EDM's one. Furthermore, the value of surface roughness is also reduced. Therefore, the introduction of magnetic field to EDM has important academic and practical values to the development of EDM.

引用

页码：337 / +

页数：2

共 50 条

[1] Experimental characterization of dry EDM performed in a pulsating magnetic field
Joshi, S.
Govindan, P.
Malshe, A.
Rajurkar, K.
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2011, 60 (01) : 239 - 242
[2] Process Research on High-Speed Small Hole Drilling by EDM Combined with Magnetic Field and Water Dispersant
Cao, MingRang
Geng, XiaoDi
MANUFACTURING PROCESS TECHNOLOGY, PTS 1-5, 2011, 189-193 : 269 - 272
[3] The influence mechanism of Halbach array magnetic field control on discharge channels in EDM
Qiu, Zhiwei
Tang, Jiajing
Li, Zhengkai
Yin, Mulong
Peng, Weiye
PHYSICA SCRIPTA, 2024, 99 (05)
[4] Magnetic field–assisted ultrasonic EDM removal mechanism and surface morphology study
Yinghuai Dong
Shaojian Zhang
Yan Wang
Yuebo Niu
Qihang Liu
Can Deng
Hangxi Gu
The International Journal of Advanced Manufacturing Technology, 2024, 130 : 6043 - 6057
[5] Research of mechanism in EDM of insulating materials
School of Mechanical and Electrical Engineering, Wuhan University of Technology, Wuhan 430070, China
不详
Wuhan Ligong Daxue Xuebao, 2007, 12 (130-132+144):
[6] Research on EDM Mechanism of Polycrystalline Diamond
Cao, F. G.
Liu, Y.
Gui, X. B.
Zhang, Q. J.
PROCEEDINGS OF THE 16TH INTERNATIONAL SYMPOSIUM ON ELECTROMACHINING, 2010, 2010, : 201 - 205
[7] Experimental research on formation mechanism of porosity in magnetic field assisted laser welding of steel
Huang, Lijin
Liu, Peng
Zhu, Su
Hua, Xueming
Dong, Shengmu
JOURNAL OF MANUFACTURING PROCESSES, 2020, 50 (50) : 596 - 602
[8] Magnetic field-assisted ultrasonic EDM removal mechanism and surface morphology study
Dong, Yinghuai
Zhang, Shaojian
Wang, Yan
Niu, Yuebo
Liu, Qihang
Deng, Can
Gu, Hangxi
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 130 (11-12): : 6043 - 6057
[9] An experimental study on magnetic field-assisted-EDM process for Inconel-625
Khan, Mohd Yunus
Rao, P. Sudhakar
Pabla, B. S.
ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2022, 8 : 2204 - 2230
[10] Experimental research on magnetic dipole characteristic of combined antenna
Xie, P. (269094848@qq.com), 1600, Editorial Office of High Power Laser and Particle Beams (26):

← 1 2 3 4 5 →