Microstructure of Al-Si-Mg alloy processed by rotary-die equal channel angular pressing

被引：38
|
作者：
Kim, JC [1 ]
Nishida, Y
Arima, H
Ando, T
机构：
[1] Korea Inst Machinery & Mat, Dept Mat Technol, Nanopowder Mat Grp, Chang Won 641010, Kyungnam, South Korea
[2] AIST, ISEM, Nagoya, Aichi 4628560, Japan
[3] Aichi Steel Co, Nagoya, Aichi, Japan
[4] Northeastern Univ, Boston, MA 02115 USA
来源：
MATERIALS LETTERS | 2003年 / 57卷 / 11期
关键词：
equal channel angular pressing (ECAP); severe plastic strain techniques; microstructure; ultrafine-grained materials; superplasticity;
D O I：
10.1016/S0167-577X(02)01053-4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
New rotary-die ECAP (RD-ECAP) was applied to a commercial Al-Si-Mg (AC4C) alloy to improve the ductility, and the microstructural developments and mechanical properties of ECAPed specimens were investigated. The as-cast Al alloy was used after machining to a cylindrical shape. ECAP was performed at 543, 603 and 673 K. The microstructure changes of samples were examined. The Vickers microhardness was measured with respect to RD-ECAP passes and the tensile test was conducted to check the high-temperature ductility. The samples after ECAP showed very clean external surface without any edge cracking. The grain size was drastically decreased and saturated into 2-3 mum after six passes because the dynamic recovery occurred during the process. After 10 passes, a very homogenous microstructure was obtained. The longation of the alloy increased from 25% to 125% after 10 passes, and the m value was 0.21 after 20 passes. (C) 2002 Elsevier Science B.V. All rights reserved.
引用
收藏
页码：1689 / 1695
页数：7
相关论文
共 50 条
  • [1] Noncombustible magnesium alloy processed by rotary-die equal channel angular pressing method
    Watazu, Akira
    Shigematsu, Ichinori
    Huang, Xinsheng
    Suzuki, Kazutaka
    Saito, Nobumi
    ECO-MATERIALS PROCESSING AND DESIGN VIII, 2007, 544-545 : 419 - +
  • [2] Rotary-die equal-channel angular pressing of an Al-7 mass% Si-0.35 mass% Mg alloy
    Nishida, Y
    Arima, H
    Kim, JC
    Ando, T
    SCRIPTA MATERIALIA, 2001, 45 (03) : 261 - 266
  • [3] Commercial purity titanium processed by rotary-die equal channel angular pressing method
    Watazu, A
    Shigematsu, I
    Ma, AB
    Suzuki, K
    Imai, T
    Saito, N
    MATERIALS TRANSACTIONS, 2005, 46 (09) : 2098 - 2101
  • [4] Tensile properties of an Al-11 mass%Si alloy at elevated temperatures processed by rotary-die equal-channel angular pressing
    Ma, AB
    Takagi, M
    Saito, N
    Iwata, H
    Nishida, Y
    Suzuki, K
    Shigematsu, I
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 408 (1-2): : 147 - 153
  • [5] Structure and microstructure evolution of Al–Mg–Si alloy processed by equal-channel angular pressing
    T. Khelfa
    M. A. Rekik
    M. Khitouni
    J. M. Cabrera-Marrero
    The International Journal of Advanced Manufacturing Technology, 2017, 92 : 1731 - 1740
  • [6] Impact toughness of an ultrafine-grained Al-11mass%Si alloy processed by rotary-die equal-channel angular pressing
    Ma, A
    Suzuki, K
    Nishida, Y
    Saito, N
    Shigematsu, I
    Takagi, M
    Iwata, H
    Watazu, A
    Imura, T
    ACTA MATERIALIA, 2005, 53 (01) : 211 - 220
  • [7] Superplasticity of SiCw/7075 composites processed by rotary-die equal-channel angular pressing
    Nishida, Y
    Arima, H
    Kim, JC
    Ando, T
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2000, 64 (12) : 1224 - 1229
  • [8] Dry Sliding Wear Behavior of AZ91 Alloy Processed by Rotary-Die Equal Channel Angular Pressing
    Xu, Qiong
    Ma, Aibin
    Saleh, Bassiouny
    Fathi, Reham
    Li, Yuhua
    Jiang, Jinghua
    Ni, Chaoying
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (06) : 3961 - 3973
  • [9] Microstructure and strengthening mechanisms in an Al-Mg-Si alloy processed by equal channel angular pressing (ECAP)
    Khelfa, T.
    Rekik, M. A.
    Munoz-Bolanos, J. A.
    Cabrera-Marrero, J. M.
    Khitouni, M.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (1-4): : 1165 - 1177
  • [10] Superplasticity of fine-grained AZ 91 alloy processed by rotary-die equal-channel angular pressing
    Ma, A
    Lim, SW
    Nishida, Y
    Nagase, M
    Saito, N
    Shigematsu, L
    Watazu, A
    THERMEC'2003, PTS 1-5, 2003, 426-4 : 2735 - 2740
12345