Surface modification of tool steel by MOS2 powder shooting

被引：5

作者：

Hanada, K ^{[1
]}

Zhang, Q ^{[1
]}

Umeda, K ^{[1
]}

Ishiwata, M ^{[1
]}

Tsukita, M ^{[1
]}

机构：

[1] Fuji Mfg Co, Div Engn, Aichi, Japan

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2004年 / 153卷

关键词：

powder shooting; MoS2; tool steel; friction properties;

D O I：

10.1016/j.jmatprotec.2004.04.196

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper describes surface modification of tool steel by MoS2 powder shooting technology and the lubricating ability of such MoS2 shot tool steel for metal-forming applications. This method introduces a MoS2 shot layer of approximately 1.5 mum into the surface of the tool steel by shooting MoS2 powder with pressurized air. Friction measurements indicated that the friction properties of such MoS2 shot tool could be remarkably improved. Ring compression tests were performed to measure the lubricating ability of the MoS2 shot tool during large deformation processes, which indicated a lower coefficient of friction compared to the case of no lubrication. Consequently, the surface roughness of compressed ring and the seizure between tool and ring could be improved. (C) 2004 Elsevier B.V. All rights reserved.

引用

页码：170 / 173

页数：4

共 50 条

[1] Surface modification of molybdenum disulfide (MoS2) fine powder
Zhou, Xiantao
Wang, Yimou
Chen, Jian
Liu, Anlin
Ma, Liang
[J]. EMERGING MATERIALS RESEARCH, 2017, 6 (01) : 8 - 14
[2] WEAR AND FRICTIONAL BEHAVIOR OF MOS2 PELLETS AND STEEL LUBRICATED WITH MOS2 POWDER
TANAKA, K
UCHIYAMA, Y
NAKAGAWA, T
MATSUNAGA, M
[J]. WEAR, 1981, 74 (01) : 165 - 175
[3] SURFACE MODIFICATION OF MOS2 USING AN STM
HOSOKI, S
HOSAKA, S
HASEGAWA, T
[J]. APPLIED SURFACE SCIENCE, 1992, 60-1 : 643 - 647
[4] Tribological Behavior of AISI52100 Steel After PC/MoS2 Lubricant Surface Modification
L. B. Zang
Y. Chen
Y. M. Wu
L. X. Ran
Y. Zheng
D. L. You
W. Y. Bi
[J]. Strength of Materials, 2020, 52 : 118 - 129
[5] Tribological Behavior of AISI52100 Steel After PC/MoS2 Lubricant Surface Modification
Zang, L. B.
Chen, Y.
Wu, Y. M.
Ran, L. X.
Zheng, Y.
You, D. L.
Bi, W. Y.
[J]. STRENGTH OF MATERIALS, 2020, 52 (01) : 118 - 129
[6] Surface modification of carbon steel and tool steel by auminizing with powder liquid coating and plasma nitriding
Murakami, K
Nishida, N
Osamura, K
Tomota, Y
Suzuki, T
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2005, 91 (01): : 212 - 216
[7] SURFACE PHOTOVOLTAGE OF MOS2
MCGOVERN, IT
WILLIAMS, RH
MEE, CHB
[J]. PHYSICA STATUS SOLIDI B-BASIC RESEARCH, 1973, 60 (01): : K53 - K55
[8] Role of oxygen adsorption in modification of optical and surface electronic properties of MoS2
Shakya, Jyoti
Kumar, Sanjeev
Mohanty, Tanuja
[J]. JOURNAL OF APPLIED PHYSICS, 2018, 123 (16)
[9] Interface modification of MoS2/SiO2 leading to conversion of conduction type of MoS2
Lin, Yow-Jon
Su, Ting-Hong
[J]. APPLIED SURFACE SCIENCE, 2016, 387 : 661 - 665
[10] SCANNING TUNNELING MICROSCOPY OBSERVATION OF MOS2 SURFACE AND GOLD CLUSTERS DEPOSITED ON MOS2 SURFACE
ICHINOKAWA, T
ICHINOSE, T
TOHYAMA, M
ITOH, H
[J]. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A-VACUUM SURFACES AND FILMS, 1990, 8 (01): : 500 - 503

← 1 2 3 4 5 →