Kinetics of acid base catalyzed transesterification of Jatropha curcas oil

被引:122
|
作者
Jain, Siddharth [1 ]
Sharma, M. P. [1 ]
机构
[1] Indian Inst Technol, Alternate Hydro Energy Ctr, Roorkee 247667, Uttarakhand, India
关键词
Jatropha curcas oil (JCO) kinetics; Transesterification; Methyl ester (ME); Fatty acid methyl ester (FAME); BIODIESEL PRODUCTION; ESTERIFICATION; TRIGLYCERIDES; FUEL;
D O I
10.1016/j.biortech.2010.05.034
中图分类号
S2 [农业工程];
学科分类号
0828 ;
摘要
Out of various non-edible oil resources, Jatropha curcas oil (JCO) is considered as future feedstock for biodiesel production in India. Limited work is reported on the kinetics of transesterification of high free fatty acids containing oil. The present study reports the results of kinetic study of two-step acid base catalyzed transesterification process carried out at an optimum temperature of 65 degrees C and 50 degrees C for esterification and transesterification respectively under the optimum methanol to oil ratio of 3:7 (v/v), catalyst concentration 1% (w/w) for H2SO4 and NaOH. The yield of methyl ester (ME) has been used to study the effect of different parameters. The results indicate that both esterification and transesterification reaction are of first order with reaction rate constant of 0.0031 min(-1) and 0.008 min(-1) respectively. The maximum yield of 21.2% of ME during esterification and 90.1% from transesterification of pretreated JCO has been obtained. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:7701 / 7706
页数:6
相关论文
共 50 条
  • [1] Kinetics of transesterification on Jatropha curcas oil to biodiesel fuel
    Jha, M. K.
    Gupta, A. K.
    Kumar, Vipan
    [J]. WCECS 2007: WORLD CONGRESS ON ENGINEERING AND COMPUTER SCIENCE, 2007, : 99 - +
  • [2] Screening, optimization and kinetics of Jatropha curcas oil transesterification with heterogeneous catalysts
    Zanette, Andreia F.
    Barella, Rodrigo A.
    Pergher, Sibele B. C.
    Treichel, Helen
    Oliveira, Debora
    Mazutti, Marcio A.
    Silva, Edson A.
    Oliveira, J. Vladimir
    [J]. RENEWABLE ENERGY, 2011, 36 (02) : 726 - 731
  • [3] Acid base catalyzed transesterification kinetics of waste cooking oil
    Jain, Siddharth
    Sharma, M. P.
    Rajvanshi, Shalini
    [J]. FUEL PROCESSING TECHNOLOGY, 2011, 92 (01) : 32 - 38
  • [4] Kinetics of Jatropha Curcas Transesterification in Batch Reactor
    Kumar, Vipan
    Kumar, Jatinder
    [J]. WCECS 2008: WORLD CONGRESS ON ENGINEERING AND COMPUTER SCIENCE, 2008, : 85 - 88
  • [5] Immobilized lipase-catalyzed transesterification of Jatropha curcas oil: Optimization and modeling
    Zarei, Alireza
    Amin, Nor Aishah Saidina
    Talebian-Kiakalaieh, Amin
    Zain, Nor Azimah Mohd
    [J]. JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS, 2014, 45 (02) : 444 - 451
  • [6] Pretreatment of high free fatty acid Jatropha curcas L. oil as preparative precursor for base transesterification
    Rahman, Norazah Abdul
    Yahya, Muhamad Nor Syafik
    [J]. 2012 IEEE COLLOQUIUM ON HUMANITIES, SCIENCE & ENGINEERING RESEARCH (CHUSER 2012), 2012,
  • [7] Enzymatic transesterification of Jatropha curcas oil assisted by ultrasonication
    Kumar, Gajendra
    Kumar, Dharmendra
    Poonam
    Johari, Rajeev
    Singh, C. P.
    [J]. ULTRASONICS SONOCHEMISTRY, 2011, 18 (05) : 923 - 927
  • [8] Transesterification of Degummed Jatropha curcas Oil Using Tri-potassium Phosphate as Base Catalyst
    Murthy, Y. V. V. Satyanarayana
    Resapu, Rajeswara R.
    Satyanarayana, M. R. S.
    Jogi, Ramakrishna
    [J]. INTERNATIONAL JOURNAL OF CHEMICAL REACTOR ENGINEERING, 2015, 13 (03) : 395 - 406
  • [9] Lipase-Catalyzed Irreversible Transesterification of Jatropha Curcas L. Seed Oil to Fatty Acid Esters: An Optimization Study
    Su, Erzheng
    Du, Liqin
    Gong, Xiangyu
    Wang, Pixiang
    [J]. JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY, 2011, 88 (06) : 793 - 800
  • [10] Preparation of bio-diesel from Jatropha curcas oil by transesterification with solid acid catalysts
    Sun, Jin-Feng
    Ren, Tian-Rui
    Xue, Si-Jia
    [J]. Guocheng Gongcheng Xuebao/The Chinese Journal of Process Engineering, 2008, 8 (06): : 1167 - 1172