Normal flux density distribution at joints of overlap stacked electrical steel laminations

被引：0
|
作者：
Erdem, Sezer [1 ]
Derebasi, Naim [1 ]
机构：
[1] Uludag Univ, Dept Phys, TR-16059 Gorukle, Bursa, Turkey
来源：
SIX INTERNATIONAL CONFERENCE OF THE BALKAN PHYSICAL UNION | 2007年 / 899卷
关键词：
magnetic induction; ferromagnetic materials;
D O I：
暂无
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
Three layer of M4 laminations with search coil wound around them were used to measure the magnetic flux density. When the samples were magnetised under controlled sinusoidal conditions, the magnetic flux density increased in the top and bottom laminations while it decreased in the middle due to less permeability of air gap. The results confirm that the normal flux density leaving from the middle lamination when approaching to the air gap is almost equal to the total extra flux joining to the top and bottom laminations.
引用
收藏
页码：772 / 772
页数：1
相关论文
共 38 条
  • [1] Interlaminar Flux Density Distribution at Joints of Overlapping Stacked Electrical Steel and Amorphous Ribbons
    Erdem, Sezer
    Derebasi, Naim
    [J]. JOURNAL OF MAGNETICS, 2010, 15 (04) : 190 - 193
  • [2] Computation of Core Losses in Electrical Steel Laminations With Impacts of Normal Flux and PWM Switching Considered
    Zhang, Zhaoqiang
    Ceballos, Julen Iradi
    Nysveen, Arne
    Haugan, Thomas S.
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2024, 60 (03) : 1 - 4
  • [3] FLUX AND LOSS DISTRIBUTION IN THE OVERLAP JOINTS OF LAMINATED CORES
    NAKATA, T
    TAKAHASHI, N
    KAWASE, Y
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 1982, 26 (1-3) : 343 - 344
  • [4] Apparatus for loss measurements under multidirectional and dc-bias flux in electrical steel laminations
    Wang, W.
    Nysveen, A.
    Magnusson, N.
    [J]. REVIEW OF SCIENTIFIC INSTRUMENTS, 2020, 91 (08):
  • [5] Eddy Current Loss in Grain-Oriented Steel Laminations Due to Normal Leakage Flux
    Wang, Wei
    Nysveen, Arne
    Magnusson, Niklas
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2021, 57 (06)
  • [6] Magnetostriction and the Influence of Harmonics in Flux Density in Electrical Steel
    Gong, Wenjie
    Zhang, Zhigao
    Hou, Ruifen
    Wang, Hui
    Xu, Zhiyi
    Lin, Anli
    He, Jian
    Fan, Wen
    Wang, Jingping
    [J]. IEEE TRANSACTIONS ON MAGNETICS, 2015, 51 (11)
  • [7] Experimental study of grain oriented electrical steel laminations under 3D magnetic flux excitation
    Mirabal, L. Millan
    Messal, O.
    Benabou, A.
    Le Menach, Y.
    Roger, J. -y.
    Ducreux, J. -p.
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2022, 564
  • [8] Experimental study of grain oriented electrical steel laminations under 3D magnetic flux excitation
    Millan Mirabal, L.
    Messal, O.
    Benabou, A.
    Le Menach, Y.
    Roger, J.-Y.
    Ducreux, J.-P.
    [J]. Journal of Magnetism and Magnetic Materials, 2022, 564
  • [9] Aspects of the cut-edge effect stress on the power loss and flux density distribution in electrical steel sheets
    Moses, AJ
    Derebasi, N
    Loisos, G
    Schoppa, A
    [J]. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2000, 215 : 690 - 692
  • [10] Comparison between measured and computed magnetic flux density distribution of simulated transformer core joints assembled from grain-oriented and non-oriented electrical steel
    Shahrouzi, Hamid
    Moses, Anthony J.
    Anderson, Philip I.
    Li, Guobao
    Hu, Zhuochao
    [J]. AIP ADVANCES, 2018, 8 (04):
1234