Recent studies to the impact of a ceramic breeder environment on the mechanical properties of EUROFER97 under operating conditions

被引:4
|
作者
Gaisina, E. [1 ]
Duerrschnabel, M. [1 ]
Leys, J. [1 ]
Knitter, R. [1 ]
Aktaa, J. [1 ]
Walter, M. [1 ]
机构
[1] Walter Karlsruhe Inst Technol KIT, Inst Appl Mat, Hermann von Helmholtz Pl 1, D-76344 Eggenstein Leopoldshafen, Germany
关键词
EUROFER; Ceramic breeder; Corrosion; Fatigue; Failure; CHEMICAL COMPATIBILITY; LITHIUM CERAMICS; CORROSION; PEBBLES; COATINGS; BEHAVIOR; BLANKET; STEEL;
D O I
10.1016/j.jnucmat.2022.153677
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The reduced activation ferritic-martensitic steel EUROFER is a prime candidate for fusion structural applications. In the advanced helium-cooled pebble bed blanket concept of DEMO, this steel is in direct contact with Li-ceramics pebbles and experiences cyclic thermomechanical loading under operating conditions. In this work, the effect of ceramic breeder environment on both the microstructure and particularly the fatigue properties of the RAFM steel was investigated. For this purpose, EUROFER samples were embedded in ceramic pebbles and annealed at 550 degrees C under a purge gas atmosphere for durations ranging 8-128 days. Microstructural studies show that annealing at the given conditions leads to the formation of a complex corrosion multilayer consisting of ferrite and iron oxide in an outer layer, as well as chromium oxide in both an intermediate and an inner layers. For annealing durations up to 32 days, the thickness of the oxide layer is continuously increasing. However, for more prolonged annealing, the thickness of the corrosion layer reaches saturation at about 20 mu m. Similar to the growth behavior of the oxide layer, the strain-controlled LCF tests showed a remarkable reduction of the LCF lifetime with increasing in the annealing duration up to 32 days. However, beyond an annealing duration of 64 days, an additional decrease of lifetime is not observed. When performing additional experiments (annealing with ceramic pebbles in vacuum and annealing in purge gas without pebbles) it is found that corrosion is mainly caused by purge gas impurities, namely oxygen and water. Furthermore, the decrease in fatigue lifetime is related to the degradation of surface quality, causing an accelerated progress of damage. Finally, Charpy impact tests combined with carrier gas hot extraction investigations revealed that hydrogen embrittlement of the samples, annealed in a breeder environment containing 0.1 vol.% H-2, can be excluded. (c) 2022 Elsevier B.V. All rights reserved.
引用
收藏
页数:8
相关论文
共 44 条
  • [1] Effect of moisture in sweep gas on chemical compatibility between ceramic breeder and EUROFER97
    Mukai, Keisuke
    Gonzalez, Maria
    Knitter, Regina
    [J]. FUSION ENGINEERING AND DESIGN, 2017, 125 : 154 - 159
  • [2] Microstructure Refinement and mechanical properties improvement of EUROFER97 steel
    Stornelli, G.
    Montanari, R.
    Varone, A.
    Di Schino, A.
    Rallini, M.
    [J]. METALLURGIA ITALIANA, 2022, 113 (11-12): : 42 - 48
  • [3] Chemical compatibility study between ceramic breeder and EUROFER97 steel for HCPB-DEMO blanket
    Mukai, Keisuke
    Sanchez, Fernando
    Knitter, Regina
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2017, 488 : 196 - 203
  • [4] Post-irradiation mechanical properties of three EUROFER97 joints
    Lucon, E.
    Leenaers, A.
    Vandermeulen, W.
    [J]. FUSION ENGINEERING AND DESIGN, 2008, 83 (04) : 620 - 624
  • [5] Correlation of microstructural and mechanical properties of neutron irradiated EUROFER97 steel
    Klimenkov, M.
    Jaentsch, U.
    Rieth, M.
    Moeslang, A.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2020, 538
  • [6] Effect of helium implantation on mechanical properties of EUROFER97 evaluated by nanoindentation
    Roldan, M.
    Fernandez, P.
    Rams, J.
    Jimenez-Rey, D.
    Ortiz, C. J.
    Vila, R.
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2014, 448 (1-3) : 301 - 309
  • [7] Grain Refinement and Improved Mechanical Properties of EUROFER97 by Thermo-Mechanical Treatments
    Stornelli, Giulia
    Di Schino, Andrea
    Mancini, Silvia
    Montanari, Roberto
    Testani, Claudio
    Varone, Alessandra
    [J]. APPLIED SCIENCES-BASEL, 2021, 11 (22):
  • [8] Assessment of mechanical properties of the martensitic steel EUROFER97 by means of punch tests
    Ruan, Y
    Spätig, P
    Victoria, M
    [J]. JOURNAL OF NUCLEAR MATERIALS, 2002, 307 (1 SUPPL.) : 236 - 239
  • [9] Mechanical properties and microstructure characterization of Eurofer97 steel variants in EUROfusion program
    Chen, Xiang
    Bhattacharya, Arunodaya
    Sokolov, Mikhail A.
    Glowers, Logan N.
    Yamamoto, Yukinori
    Graening, Tim
    Linton, Kory D.
    Katoh, Yutai
    Rieth, Michael
    [J]. FUSION ENGINEERING AND DESIGN, 2019, 146 : 2227 - 2232
  • [10] Effect of thermo-mechanical parameters on the mechanical properties of Eurofer97 steel for nuclear applications
    Di Schino, Andrea
    Testani, Claudio
    Pilloni, Luciano
    [J]. OPEN ENGINEERING, 2018, 8 (01): : 349 - 353