Analysis of the Adhesive Damage for Different Patch Shapes in Bonded Composite Repair of Corroded Aluminum Plate Under Thermo-Mechanical Loading

被引：12
|
作者：
Salem, M. [1 ]
Berrahou, M. [1 ]
Mechab, B. [1 ]
Bouiadjra, B. Bachir [1 ]
机构：
[1] Univ Djillali Liabes Sidi Bel Abbes, Dept Mech Engn, LMPM, BP 89, Cite Ben Mhidi 22000, Sidi Bel Abbes, Algeria
来源：
JOURNAL OF FAILURE ANALYSIS AND PREVENTION | 2021年 / 21卷 / 04期
关键词：
Composite; (K-I) Stress intensity factor; Finite element method (FEM); Damaged area ratio D-R; Thermo-mechanical loading;
D O I：
10.1007/s11668-021-01167-x
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This work presents a three-dimensional finite element numerical analysis of the performance of plates repaired by composite patch. The effect of the geometric shapes of the composite patches on the damaged area variation of the adhesive (FM-73) of corroded and cracked Al 2024-T3 plates, the mechanical properties of different composites and the thermal loading on the ratio of the damaged area (D-R) to the crack size were studied. The results show that glass/epoxy repaired sheets give lower K-I and D-R values than the other two composites studied, and this leads to the conclusion that glass/epoxy increases the performance and durability of Al 2024-T3 aircraft structures repaired by patch composite.
引用
收藏
页码：1274 / 1282
页数：9
相关论文
共 50 条
  • [1] Analysis of the Adhesive Damage for Different Patch Shapes in Bonded Composite Repair of Corroded Aluminum Plate Under Thermo-Mechanical Loading
    M. Salem
    M. Berrahou
    B. Mechab
    B. Bachir Bouiadjra
    Journal of Failure Analysis and Prevention, 2021, 21 : 1274 - 1282
  • [2] Analysis of the adhesive damage for different patch shapes in bonded composite repair of corroded aluminum plate
    Mohamed, Berrahou
    Bouiadjra, B. Bachir
    STRUCTURAL ENGINEERING AND MECHANICS, 2016, 59 (01) : 123 - 132
  • [3] Analysis of the adhesive damage for different patch shapes in bonded composite repair of aircraft structures
    Benyahia, F.
    Albedah, A.
    Bouiadjra, B. Bachir
    MATERIALS & DESIGN, 2014, 54 : 18 - 24
  • [4] Stress intensity factor for repaired crack with bonded composite patch under thermo-mechanical loading
    Mhamdia, R.
    Bouadjra, B. Bachir
    Serier, B.
    Ouddad, W.
    Feaugas, X.
    Touzain, S.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2011, 30 (05) : 416 - 424
  • [5] Analysis of the adhesive damage for different shapes and types patch's in corroded plates with an inclined crack
    Benzineb, Hayet
    Berrahou, Mohamed
    Serier, Mohamed
    FRATTURA ED INTEGRITA STRUTTURALE-FRACTURE AND STRUCTURAL INTEGRITY, 2022, (60): : 331 - 345
  • [6] Numerical stress analysis in adhesively bonded joints under thermo-mechanical loading
    Al-Ramahi, Nawres J.
    Joffe, Roberts
    Varna, Janis
    ADVANCES IN MECHANICAL ENGINEERING, 2020, 12 (10)
  • [7] Mechanical behavior of composite beam aluminum-sandwich honeycomb strengthened by imperfect FGM plate under thermo-mechanical loading
    Tayeb, Bensatallah
    Abderezak, Rabahi
    Daouadji, Tahar Hassaine
    COUPLED SYSTEMS MECHANICS, 2024, 13 (02): : 133 - 151
  • [8] Buckling analysis of composite laminated plate in different boundary conditions under thermo mechanical loading
    Pathak, Deepak Kumar
    Purohit, Rajesh
    Soni, Akhilesh
    Gupta, Harsh S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 2211 - 2214
  • [9] Dynamic response of composite panels under thermo-mechanical loading
    Kamari, Emarti
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2022, 36 (08) : 3781 - 3790
  • [10] Dynamic response of composite panels under thermo-mechanical loading
    Emarti Kumari
    Journal of Mechanical Science and Technology, 2022, 36 : 3781 - 3790
12345