Analysis and optimization of M-shaped boom based on response surface method

被引:4
|
作者
Shi, Jiaqi [1 ]
Qi, Junwei [1 ]
Wang, Yuequan [1 ]
Xiao, Jun [1 ]
Zhao, Cong [1 ]
机构
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mat Sci & Technol, Nanjing 210016, Peoples R China
关键词
composite materials; deployable boom; NSGA-II; response surface method;
D O I
10.1002/pc.26694
中图分类号
TB33 [复合材料];
学科分类号
摘要
The M-shaped boom is a support structure that can be packed and launched and deployed in orbit using stored elastic strain energy. This work attempts a method to optimize the M boom. The response surface method was used to fit the finite element (FE) results to obtain surrogate models for the strain storage and the fundamental frequency in the deployed state, and the average errors between the surrogate model results and FE results were 1.56% and 0.9% respectively. The influence of different design variables on the results is analyzed by using surrogate models. Considering the requirements of boom deployment, a non-dominated sorting genetic algorithm is used for multi-objective optimization. The optimization targets the maximum strain stored energy and the maximum fundamental frequency, with the constraint of boom mass. The optimization results are at the Pareto frontier.
引用
收藏
页码:4327 / 4338
页数:12
相关论文
共 50 条
  • [1] Artificial neural network (ANN)-based optimization of a numerically analyzed m-shaped piezoelectric energy harvester
    Ali, Ahsan
    Sheeraz, Muhammad Abdullah
    Bibi, Saira
    Khan, Muhammad Zubair
    Malik, Muhammad Sohail
    Ali, Wajahat
    [J]. FUNCTIONAL MATERIALS LETTERS, 2021, 14 (08)
  • [2] Dynamic Response Analysis of a Subsea Rigid M-Shaped Jumper under Combined Internal and External Flows
    Li, Guangzhao
    Li, Wenhua
    Lin, Shanying
    Han, Fenghui
    Zhou, Xingkun
    [J]. JOURNAL OF MARINE SCIENCE AND ENGINEERING, 2024, 12 (08)
  • [3] Design, modeling and optimization of an m-shaped variable reluctance energy harvester for rotating applications
    Xu, Ye
    Bader, Sebastian
    Oelmann, Bengt
    [J]. ENERGY CONVERSION AND MANAGEMENT, 2019, 195 : 1280 - 1294
  • [4] A dynamic tensile method for M-shaped specimen loaded by Hopkinson pressure bar
    Shu, Qi
    Dong, Xinlong
    Yu, Xinlu
    [J]. Baozha Yu Chongji/Explosion and Shock Waves, 2020, 40 (08):
  • [5] Application of a New M-shaped High Tibial Osteotomy Method: A Technical Note
    Liu, Dejun
    Liu, Hongyuan
    Li, Yuanguo
    Zhang, Guoliang
    Li, Wenguang
    Yao, Xiang
    Tang, Jilei
    [J]. INDIAN JOURNAL OF ORTHOPAEDICS, 2023, 57 (07) : 1153 - 1157
  • [6] Application of a New M-shaped High Tibial Osteotomy Method: A Technical Note
    Dejun Liu
    Hongyuan Liu
    Yuanguo Li
    Guoliang Zhang
    Wenguang Li
    Xiang Yao
    Jilei Tang
    [J]. Indian Journal of Orthopaedics, 2023, 57 (7) : 1153 - 1157
  • [7] Surface-plasmon-enhanced GaN-LED based on a multilayered M-shaped nano-grating
    Zhang, Haosu
    Zhu, Jun
    Zhu, Zhendong
    Jin, Yuanhao
    Li, Qunqing
    Jin, Guofan
    [J]. OPTICS EXPRESS, 2013, 21 (11): : 13492 - 13501
  • [8] Dual UWB Bandstop Filter Based on M-shaped Defected Microstrip Structure
    Zheng, Xuemei
    [J]. 2017 PROGRESS IN ELECTROMAGNETICS RESEARCH SYMPOSIUM - SPRING (PIERS), 2017, : 1060 - 1064
  • [9] Performance Analysis of Wave Rotor Based on Response Surface Optimization Method
    Liu, Peiqi
    Feng, Mingyu
    Liu, Xinyu
    Wang, Haitao
    Hu, Dapeng
    [J]. JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME, 2022, 144 (06):
  • [10] Simultaneous Temperature and Strain Sensing Based on M-Shaped Single Mode Fiber
    Dong, Yue
    Ren, Guobin
    Xiao, Han
    Gao, Yixiao
    Li, Haisu
    Xiao, Shiying
    Jian, Shuisheng
    [J]. IEEE PHOTONICS TECHNOLOGY LETTERS, 2017, 29 (22) : 1955 - 1958