Optimization of the combustion synthesis quasi-isostatic pressing processing sequence in tic-based cermets

被引：0
|
作者：
Olevsky, E [1 ]
Kristofetz, E [1 ]
Uzoigwe, C [1 ]
Meyers, M [1 ]
机构：
[1] Univ Calif San Diego, NSF, Inst Mech & Mat, La Jolla, CA 92093 USA
来源：
ADVANCES IN POWDER METALLURGY & PARTICULATE MATERIALS - 1997 | 1997年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A combination of combustion synthesis and quasi-isostatic pressing (QIP) is used for the production of high-density titanium carbide/Ti-Ni cermets. The goals of the study include the minimization of final porosity and the control of the microstructure and phase composition. The parameters which are considered for the optimization include the initial sample porosity, the initial chemical composition, the time delay between ignition and consolidation.
引用
收藏
页码：343 / 349
页数：7
相关论文
共 13 条
  • [1] Functionally graded TiC-based cermets via combustion synthesis and quasi-isostatic pressing
    Pacheco, MM
    Stuivinga, M
    Carton, EP
    Katgerman, L
    FUNCTIONALLY GRADED MATERIALS VIII, 2005, 492-493 : 63 - 68
  • [2] Combustion synthesis/quasi-isostatic pressing of TiC–NiTi cermets: processing and mechanical response
    E. R. Strutt
    E. A. Olevsky
    M. A. Meyers
    Journal of Materials Science, 2008, 43 : 6513 - 6526
  • [3] Combustion synthesis/quasi-isostatic pressing of TiC-NiTi cermets: processing and mechanical response
    Strutt, E. R.
    Olevsky, E. A.
    Meyers, M. A.
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (19) : 6513 - 6526
  • [4] Combustion synthesis/quasi-isostatic pressing of TiC0.7-NiTi cermets:: microstructure and transformation characteristics
    Strutt, E. R.
    Radetic, T.
    Olevsky, E. A.
    Meyers, M. A.
    JOURNAL OF MATERIALS SCIENCE, 2008, 43 (17) : 5905 - 5923
  • [5] Effect of Fe on the phases and microstructure of TiC-Fe cermets by combustion synthesis/quasi-isostatic pressing
    Zhang, WF
    Zhang, XH
    Wang, HL
    Hong, CQ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 381 (1-2): : 92 - 97
  • [6] Combustion synthesis/quasi-isostatic pressing of TiC0.7–NiTi cermets: microstructure and transformation characteristics
    E. R. Strutt
    T. Radetic
    E. A. Olevsky
    M. A. Meyers
    Journal of Materials Science, 2008, 43 : 5905 - 5923
  • [7] Combustion synthesis and quasi-isostatic densification of powder cermets
    Olevsky, EA
    Strutt, ER
    Meyers, MA
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2002, 121 (01) : 157 - 166
  • [8] A novel fabrication technique of toughened TiC-based solid solution cermets using mechanochemical synthesis
    Chen, Xiao
    Yao, Zhenhua
    Xiong, Weihao
    Xu, Jianfeng
    JOURNAL OF MATERIALS SCIENCE, 2020, 55 (27) : 12776 - 12788
  • [9] A novel fabrication technique of toughened TiC-based solid solution cermets using mechanochemical synthesis
    Xiao Chen
    Zhenhua Yao
    Weihao Xiong
    Jianfeng Xu
    Journal of Materials Science, 2020, 55 : 12776 - 12788
  • [10] Combustion synthesis of TiC-based ceramic-metal composites with high entropy alloy binder
    Rogachev, A. S.
    Vadchenko, S. G.
    Kochetov, N. A.
    Kovalev, D. Yu
    Kovalev, I. D.
    Shchukin, A. S.
    Gryadunov, A. N.
    Baras, F.
    Politano, O.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (07) : 2527 - 2532
12