Effect of biasing conditions on the performance of a SMA spring actuator under thermo-mechanical loading

被引：8
|
作者：
Bhatt, Nisha [1 ]
Gurung, Hema [1 ]
Soni, Sanjeev [2 ]
Singla, Ashish [1 ]
机构：
[1] Thapar Inst Engn & Technol, Dept Mech Engn, Patiala 147004, Punjab, India
[2] Cent Sci Instruments Org CSIR CSIO, Biomed Instrumentat Div, Chandigarh, Punjab, India
来源：
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES | 2022年 / 29卷 / 25期
关键词：
Antagonistic system; biasing conditions; constitutive model; shape memory alloy; spring; thermo-mechanical loading; SHAPE-MEMORY ALLOYS; CONSTITUTIVE MODELS; KINETICS; DESIGN;
D O I：
10.1080/15376494.2021.1934759
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents an extension of the existing phase kinetics model of shape memory alloy (SMA) wire on a SMA spring actuator. The phenomenological modeling of an SMA spring under two different bias conditions - SMA spring with (A) normal spring (B) SMA wire along with the computing algorithm is addressed. The results of Case A are found in close agreement with the published literature. Whereas, the results of Case B are reported for the first time and outperform the results of Case A in terms of equal deflection, more controllability, and degrees of freedom as compared with Case A.
引用
收藏
页码：4599 / 4613
页数：15
相关论文
共 50 条
  • [1] Investigation on thermo-mechanical behavior of SMA spring under the influence of different actuation medium
    Nath, Tameshwer
    Akash, K.
    Chouhan, Priya
    Lad, Bhupesh Kumar
    Palani, I. A.
    [J]. MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2018, 24 (06): : 2813 - 2821
  • [2] Investigation on thermo-mechanical behavior of SMA spring under the influence of different actuation medium
    Tameshwer Nath
    K. Akash
    Priya Chouhan
    Bhupesh Kumar Lad
    I. A. Palani
    [J]. Microsystem Technologies, 2018, 24 : 2813 - 2821
  • [3] Thermo-mechanical modelling of spring-based SMA actuators
    Gedouin, P. -A.
    Pino, L.
    Bourgeot, J. -M.
    Delaleau, E.
    Chirani, S. Arbab
    Calloch, S.
    [J]. 2016 11TH FRANCE-JAPAN & 9TH EUROPE-ASIA CONGRESS ON MECHATRONICS (MECATRONICS) / 17TH INTERNATIONAL CONFERENCE ON RESEARCH AND EDUCATION IN MECHATRONICS (REM), 2016, : 373 - 378
  • [4] Concrete strength under different modes of thermo-mechanical loading conditions
    Materials Eng. Dept., Faculty of Eng., Zagazig University, Zagazig, Egypt
    不详
    [J]. AEJ - Alexandria Engineering Journal, 2007, 46 (04): : 537 - 549
  • [5] Thermo-mechanical response of TEHL contacts under dynamic loading conditions
    Havaej, Peyman
    Degroote, Joris
    Fauconnier, Dieter
    [J]. Tribology International, 2025, 201
  • [6] Solder joint failures under thermo-mechanical loading conditions - A review
    Depiver, Joshua A.
    Mallik, Sabuj
    Harmanto, Dani
    [J]. ADVANCES IN MATERIALS AND PROCESSING TECHNOLOGIES, 2021, 7 (01) : 1 - 26
  • [7] Simulation of shape memory alloy wire actuator behavior under arbitrary thermo-mechanical loading
    Banerjee, A.
    [J]. SMART MATERIALS AND STRUCTURES, 2012, 21 (12)
  • [8] Assessment of extreme thermo-mechanical states of engineering systems under operating loading conditions
    Nikolay A. Makhutov
    Mikhail M. Gadenin
    Dmitry O. Reznikov
    [J]. Acta Mechanica, 2021, 232 : 1829 - 1839
  • [9] Assessment of extreme thermo-mechanical states of engineering systems under operating loading conditions
    Makhutov, Nikolay A.
    Gadenin, Mikhail M.
    Reznikov, Dmitry O.
    [J]. ACTA MECHANICA, 2021, 232 (05) : 1829 - 1839
  • [10] Defect annihilations in carbon nanotubes under thermo-mechanical loading
    Shet, C
    Chandra, N
    Namilae, S
    [J]. JOURNAL OF MATERIALS SCIENCE, 2005, 40 (01) : 27 - 36
12345