Spray-drying of ceramics for plasma-spray coating

被引：143

作者：

Cao, XQ

Vassen, R

Schwartz, S

Jungen, W

Tietz, F

Stöever, D

机构：

[1] Forschungszentrum Julich, Inst Verkstoffe & Verfahren Energietech, D-52425 Julich, Germany

[2] Hunan Normal Univ, Coll Chem & Chem Engn, Hunan 410081, Peoples R China

来源：

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2000年 / 20卷 / 14-15期

关键词：

plasma spraying; spray-drying; thermal barrier coatings; ZrO2-Al2O3;

D O I：

10.1016/S0955-2219(00)00112-6

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The spray-drying process of ceramics which are candidate materials for thermal barrier coatings (TBCs), i.e. 3YSZ + 0, 2, 4, 6 wt.% Al2O3, is discussed in this paper. The two most important properties of spray-dried powders to determine the coating quality are density and particle size. Polyethyleneimine (PEI) acts as both an organic binder and a dispersant giving low viscosity in the suspension. The optimised suspension composition is: greater than or equal to 33.6 vol.% powder + 1.8 wt.% PEI + ethanol, and operational parameters of the spray-dryer: drying temperature 175 degreesC, feeding rate 55 cm(3)/min, feeding pressure 1.013 x 10(4) Pa. (C) 2000 Published by Elsevier Science Ltd. All rights reserved.

引用

页码：2433 / 2439

页数：7

共 50 条

[1] APPLYING SPRAY-DRYING TO CERAMICS
MASTERS, K
[J]. AMERICAN CERAMIC SOCIETY BULLETIN, 1994, 73 (01): : 63 - &
[2] SPRAY-DRYING IN THE MODERN CERAMICS INDUSTRY
SHAW, FV
[J]. AMERICAN CERAMIC SOCIETY BULLETIN, 1981, 60 (09): : 928 - 928
[3] PLASMA-SPRAY FORMING CERAMICS AND LAYERED COMPOSITES
SAMPATH, S
GANSERT, R
HERMAN, H
[J]. JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1995, 47 (10): : 30 - 33
[4] SPRAY-DRYING
ANDERSSON, H
[J]. KEMISK TIDSKRIFT, 1989, 101 (11): : 49 - 52
[5] Splat formation in plasma-spray coating process
Mostaghimi, J
Chandra, S
[J]. PURE AND APPLIED CHEMISTRY, 2002, 74 (03) : 441 - 445
[6] SPRAY-DRYING FGD
不详
[J]. EPRI JOURNAL, 1984, 9 (04): : 48 - 49
[7] The Significance of Spray-Drying
McHugh, Tara
[J]. FOOD TECHNOLOGY, 2018, 72 (04) : 142 - 144
[8] PLASMA-SPRAY COATING PROCESSES - PHYSICO-MATHEMATICAL CHARACTERIZATION
GALOR, B
[J]. JOURNAL OF ENGINEERING FOR POWER-TRANSACTIONS OF THE ASME, 1980, 102 (03): : 589 - 593
[9] Influence of process parameters on the deposition footprint in plasma-spray coating
K. Remesh
H. W. Ng
S. C. M. Yu
[J]. Journal of Thermal Spray Technology, 2003, 12 : 377 - 392
[10] Encapsulation of Active Ingredients in Food Industry by Spray-Drying and Nano Spray-Drying Technologies
Pinon-Balderrama, Claudia, I
Leyva-Porras, Cesar
Teran-Figueroa, Yolanda
Espinosa-Solis, Vicente
Alvarez-Salas, Claudia
Saavedra-Leos, Maria Z.
[J]. PROCESSES, 2020, 8 (08)

← 1 2 3 4 5 →