An experimental investigation on performance of rectangular fins on a horizontal base in free convection heat transfer

This paper reports an experimental study of free convection heat transfer from rectangular fin-arrays on a horizontal base. An experimental set-up was constructed and calibrated, 15 sets of fin-arrays and a base plate without fins were tested in atmosphere. Fin height was varied from 6 mm to 26 mm, fin spacing was varied from 6.2 mm to 83 mm. The base-to-ambient temperature difference was also varied independently and systematically with the power supply to heater ranging from 8 W to 50 W. Fin length and fin thicknesses were fixed at 100 mm and 3 mm, respectively. The experimental program was conducted so as to clearly delineate the separate roles of fin height, fin spacing and base-to-ambient temperature difference. It was found that for a given base-to-ambient temperature difference the convection heat transfer rate from fin-arrays takes on a maximum value as a function of fin spacing and fin height. For a given base-to-ambient temperature difference the enhancement of the convection heat transfer rate of fin-arrays relative to that for base plate without fins is strongly dependent on the fin spacing to fin height ratio and number of fins. A correlation was also presented relating the convection heat transfer rate of fin-arrays relative to that for base plate without fins with the relevant non-dimensional parameters.