共 6 条
Transparent and anti-fogging AlPO4-5 films constructed by oblique oriented nano-flake crystals
被引:2
|作者:
Tong, Fei
[1
,2
,3
]
Gong, Jie
[1
]
Yu, Liang
[4
]
Li, Ming
[2
,3
]
Zhang, Lixiong
[2
,3
]
机构:
[1] Jiangsu Univ Technol, Sch Chem & Environm Engn, Changzhou 213001, Peoples R China
[2] Nanjing Tech Univ, State Key Lab Mat Oriented Chem Engn, Nanjing 211816, Peoples R China
[3] Nanjing Tech Univ, Coll Chem Engn, Nanjing 211816, Peoples R China
[4] Lulea Univ Technol, Chem Technol, SE-97187 Lulea, Sweden
来源:
关键词:
AlPO4-5 thin film;
Oriented film;
Transparent;
Superhydrophilicity;
Anti-fogging;
ZEOLITE;
MEMBRANES;
SURFACES;
FABRICATION;
POLYMER;
GROWTH;
WATER;
D O I:
10.1016/j.cjche.2021.02.004
中图分类号:
TQ [化学工业];
学科分类号:
0817 ;
摘要:
In the present work, transparent and anti-fogging AlPO4-5 films were prepared on glass substrates using a novel developed process. The process entails a simple in situ sol-gel followed by vapor phase transport. The in situ sol-gel process was implemented by coating the precursor sols for the synthesis of AlPO4-5 on the glass substrates successively using the spin-coating method. The films and powders scribed from the films were characterized by X-Ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), atomic force microscope (AFM), X-ray photoelectron spectroscopy and transmission electron microscope (TEM). The unique films were composed of oblique oriented nanoflake AlPO4-5 crystals with the thickness of about 20 nm. The formation of nano-flake crystals can be ascribed to the high concentration of the precursors, resulting in the formation of a supersaturation system. The obtained films showed high antifogging performance due to the superhydrophilicity with a water contact angle of lower than 1.0 degrees. The silicone oil contact angle was also low about 8.2 degrees. In addition, heteroatom-substituted AlPO4-5 films showing different colors can be obtained easily by simply adding transition metal ions in the phosphate acid solution during the preparation that can extend the application of the method for different coating demand. (C) 2021 The Chemical Industry and Engineering Society of China, and Chemical Industry Press Co., Ltd. All rights reserved.
引用
收藏
页码:332 / 340
页数:9
相关论文