Dynamic Mechanical Response of Additive Manufactured Ti-6Al-4V

被引：12

作者：

Brown, A. D. ^{[1
]}

Ameri, A. H. ^{[1
]}

Gregg, A. ^{[1
]}

Austin, D. C. ^{[1
]}

Escobedo, J. P. ^{[1
]}

Hazell, P. J. ^{[1
]}

East, D. ^{[2
]}

Quadir, M. Z. ^{[3
]}

机构：

[1] Univ New South Wales, Sch Engn & Informat Technol, Campbell, ACT 2612, Australia

[2] CSIRO, Mfg Flagship, Clayton, Vic 3168, Australia

[3] Curtin Univ, Microscopy & Microanal Facil, Perth, WA 6845, Australia

来源：

SHOCK COMPRESSION OF CONDENSED MATTER - 2017 | 2018年 / 1979卷

关键词：

SHOCK RESPONSE; SPALL; DAMAGE; LASER;

D O I：

10.1063/1.5044817

中图分类号：

O469 [凝聚态物理学];

学科分类号：

070205 ;

摘要：

The dynamic mechanical response of additive manufactured (AM) Ti-6Al-4V has been investigated via Split-Hopkinson Pressure Bar (SHPB) and single-stage gas gun plate-impact experiments. Rods of Ti-6Al-4V were manufactured from Arcam and Renishaw electron beam melting (EBM) and laser melting deposition (LMD) powder bed systems, respectively. Horizontal and vertical build directions were produced for plate impacts to determine any effect of build layers on dynamic tensile strength. The as-received microstructures were characterized via optical microscopy and electron backscatter diffraction (EBSD). Johnson-Cook constitutive model parameters were found for the EBM condition via SHPB experiments. Plate impacts producing nominal peak shock stresses near the theoretical tensile strength of the material (3-5 GPa) were conducted to study incipient spall damage conditions as a function of AM material condition.

引用

页数：5

共 50 条

[1] Blast response of additive manufactured Ti-6Al-4V sandwich panels
Wei, Yuchen
Zhang, Chengjian
Yuan, Ye
Chen, Pengwan
Huang, Chunyang
Li, Jiachen
Yuan, Mengqi
[J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2023, 176
[2] Spall fracture in additive manufactured Ti-6Al-4V
Jones, D. R.
Fensin, S. J.
Dippo, O.
Beal, R. A.
Livescu, V.
Martinez, D. T.
Trujillo, C. P.
Florando, J. N.
Kumar, M.
Gray, G. T., III
[J]. JOURNAL OF APPLIED PHYSICS, 2016, 120 (13)
[3] Ultrasonic Assessment of Additive Manufactured Ti-6Al-4V
Schehl, Norman
Kramb, Vicki
Dierken, Josiah
Aldrin, John
Schwalbach, Edwin
John, Reji
[J]. 44TH ANNUAL REVIEW OF PROGRESS IN QUANTITATIVE NONDESTRUCTIVE EVALUATION, VOL 37, 2018, 1949
[4] MECHANICAL BEHAVIOR OF Ti-6Al-4V MANUFACTURED BY ELECTRON BEAM ADDITIVE FABRICATION
Ladani, Leila
Roy, Lalit
[J]. PROCEEDINGS OF THE ASME 8TH INTERNATIONAL MANUFACTURING SCIENCE AND ENGINEERING CONFERENCE - 2013, VOL 1, 2013,
[5] Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
Fude Wang
Stewart Williams
Paul Colegrove
Alphons A. Antonysamy
[J]. Metallurgical and Materials Transactions A, 2013, 44 : 968 - 977
[6] Microstructure and Mechanical Properties of Wire and Arc Additive Manufactured Ti-6Al-4V
Wang, Fude
Williams, Stewart
Colegrove, Paul
Antonysamy, Alphons A.
[J]. METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (02): : 968 - 977
[7] On the size and orientation effect in additive manufactured Ti-6Al-4V
Barba, D.
Alabort, C.
Tang, Y. T.
Viscasillas, M. J.
Reed, R. C.
Alabort, E.
[J]. MATERIALS & DESIGN, 2020, 186 (186)
[8] Hydrogen trapping in additive manufactured Ti-6Al-4V alloy
Metalnikov, Polina
Eliezer, Dan
Ben-Hamu, Guy
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 811 (811):
[9] Effect of organic impurity in additive manufactured Ti-6Al-4V
Winkler, Kerstin
Ahmad, Husam
Danzig, Andre
Gloetter, Philipp
Schubert, Frank
Wagner, Guntram
Kroll, Lothar
[J]. ADDITIVE MANUFACTURING LETTERS, 2023, 5
[10] Mechanical Properties Enhancement of Additive Manufactured Ti-6Al-4V by Machine Hammer Peening
Neto, Leonor
Williams, Stewart
Ding, Jialuo
Honnige, Jan
Martina, Filomeno
[J]. ADVANCED SURFACE ENHANCEMENT, INCASE 2019, 2020, : 121 - 132

← 1 2 3 4 5 →