Formation of Co-capping during sintering of straight WC-10 wt% Co

被引：24
|
作者：
Guo, Jun [1 ]
Fan, Peng [1 ]
Wang, Xu [1 ]
Fang, Zhigang Zak [1 ]
机构：
[1] Univ Utah, Dept Met Engn, Salt Lake City, UT 84112 USA
来源：
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS | 2010年 / 28卷 / 03期
关键词：
Co-capping; Cemented carbide; Functionally graded materials; Liquid redistribution; Composition gradient; GRADED WC-CO; EQUILIBRIUM DISTRIBUTION; COBALT GRADIENT; LIQUID; COMPOSITES; MIGRATION; CARBIDES; SIZE;
D O I：
10.1016/j.ijrmhm.2009.11.005
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Co-capping is a term that refers to a thin layer of Co occasionally observed on the surface of sintered WC-Co parts. It is usually considered undesirable and needs to be removed. The mechanism of its formation has been a myth in the industry and not fully understood to date. In this study, the effects of several factors, including cooling rate, atmosphere and carbon content in specimens, on the formation of Co-capping during sintering of straight WC-Co materials were experimentally examined. The mechanism of Co-capping formation was discussed based on the principles of liquid-phase migration. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：317 / 323
页数：7
相关论文
共 50 条
  • [1] Thermal Properties of WC-10 wt. (%) Co Alloys
    Leo Machado, Francisco de Assis
    Rodrigues, Marcio Ferreira
    Vargas, Helion
    Filgueira, Marcello
    Faria, Roberto da Trindade, Jr.
    [J]. MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2008, 11 (01): : 37 - 41
  • [2] Rapid sintering of ultra-fine WC-10 wt% Co by high-frequency induction heating
    H. C. Kim
    I. J. Shon
    Z. A. Munir
    [J]. Journal of Materials Science, 2005, 40 : 2849 - 2854
  • [3] Rapid sintering of ultra-fine WC-10 wt% Co by high-frequency induction heating
    Kim, HC
    Shon, IJ
    Munir, ZA
    [J]. JOURNAL OF MATERIALS SCIENCE, 2005, 40 (11) : 2849 - 2854
  • [4] Measurement and modeling of room temperature co-deformation in WC-10 wt.% Co
    Livescu, V
    Clausen, B
    Paggett, JW
    Krawitz, AD
    Drake, EF
    Bourke, MAM
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 399 (1-2): : 134 - 140
  • [5] Ultrafine hardmetals prepared by WC-10 wt.%Co composite powder
    Xiong, Zhen
    Shao, Gangqin
    Shi, Xiaoliang
    Duan, Xinglong
    Yan, Li
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2008, 26 (03): : 242 - 250
  • [6] Structure of nanocrystalline WC-10%Co powder
    杨志民
    毛昌辉
    杜军
    [J]. Transactions of Nonferrous Metals Society of China, 2001, (04) : 529 - 534
  • [7] Structure of nanocrystalline WC-10%Co powder
    Yang, ZM
    Mao, CH
    Du, J
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2001, 11 (04) : 529 - 534
  • [8] TENSILE CREEP OF WC-10 PERCENT CO AND WC-10 PERCENT TAC-10 PERCENT CO ALLOYS AT ELEVATED-TEMPERATURES
    UEDA, F
    DOI, H
    FUJIWARA, F
    MASATOMI, H
    OOSAWA, Y
    [J]. TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1975, 16 (09): : 591 - 600
  • [9] FEM of stress partition during compression of WC-10 wt.% Co with realistic 3D morphology
    Degeneve, L.
    Mari, D.
    Machado, P. V. S.
    Jimenez-Pique, E.
    [J]. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2023, 111
  • [10] Sintering of WC-10%Co nano powders containing TaC and VC grain growth inhibitors
    Mahmoodan, M.
    Aliakbarzadeh, H.
    Gholamipour, R.
    [J]. TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2011, 21 (05) : 1080 - 1084
12345