EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THE FLOW IN A LP INDUSTRIAL STEAM TURBINE WITH PART-SPAN CONNECTORS

An experimental and numerical study on the flow in a three stage low pressure (LP) industrial steam turbine is presented and analyzed. The investigated LP section features conical friction bolts in the last and a lacing wire in the penultimate rotor blade row. These part-span connectors (PSC) allow safe turbine operation over an extremely wide range and even in blade resonance condition. However, additional losses are generated which affect the performance of the turbine. In order to capture their impact on the flow field, extensive measurements with pneumatic multi-hole probes in an industrial steam turbine test rig have been carried out. State-of-the-art three-dimensional CFD applying a non-equilibrium steam (NES) model is used to examine the aero-thermodynamic effects of the PSC on the wet steam flow. A detailed comparison between measurement data and CFD results is performed for several operating conditions. The investigation shows that the applied CFD model is able to capture the three-dimensional flow field in LP steam turbine blading with PSC and the total pressure reduction due to the PSC with a generally good agreement to measured values and is therefore sufficient for engineering practice.