Interfacial tension of marine lipids in contact with high pressure carbon dioxide

被引:15
|
作者
Seifried, Bernhard [1 ]
Temelli, Feral [1 ]
机构
[1] Univ Alberta, Dept Agr Food & Nutr Sci, Edmonton, AB T6G 2P5, Canada
来源
JOURNAL OF SUPERCRITICAL FLUIDS | 2010年 / 52卷 / 02期
基金
加拿大自然科学与工程研究理事会;
关键词
Fish oil; Marine lipids; Interfacial tension; Pendant drop method; Supercritical carbon dioxide; Surface excess; ACID ETHYL-ESTERS; PHASE-EQUILIBRIA; BINARY-SYSTEMS; FISH-OIL; TRIGLYCERIDE MIXTURES; ALPHA-TOCOPHEROL; METHYL-MYRISTATE; SURFACE-TENSION; FALLING FILMS; MASS-TRANSFER;
D O I
10.1016/j.supflu.2009.12.009
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Interfacial tension (IFT) of fish oil triglycerides (TG) and fatty acid ethyl esters (FAEE) in contact with carbon dioxide (CO2) was measured according to the pendant drop method at 40, 55 and 70 degrees C and pressures up to 25 MPa. The IFT of both TG and FAEE decreased substantially with CO2 pressure. The IFT of FAEE vanished at elevated pressures, whereas that of TG decreased to a fairly constant level of about 2 mN/m. The IFT was correlated using a model taking into account the density, pressure and temperature of CO2, thereby facilitating the calculation of the ideal pendant drop volume as well as the surface excess concentration of CO2. In the pressure range studied, the pendant drop volume for FAEE decreased with pressure, whereas for TG it increased at elevated presssures due to the predominant effect of buoyancy. Furthermore, the change in IFT over time was determined at 55 degrees C for TG in contact with CO2 at pressures up to 11.4 MPa showing a decrease of IFT over time at low pressures, whereas at higher pressures it remained nearly constant. IFT influences drop formation as well as the disintegration of falling films thereby affecting the performance of separation processes. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码:203 / 214
页数:12
相关论文
共 50 条
  • [1] Interfacial tension and density of ethanol in contact with carbon dioxide
    Dittmar, D.
    Bijosono Oei, S.
    Eggers, R.
    Chemical Engineering and Technology, 2002, 25 (01): : 23 - 27
  • [2] Interfacial tension and density of ethanol in contact with carbon dioxide
    Dittmar, D
    Oei, SB
    Eggers, R
    CHEMICAL ENGINEERING & TECHNOLOGY, 2002, 25 (01) : 23 - 27
  • [3] INTERFACIAL-TENSION IN HIGH-PRESSURE CARBON-DIOXIDE MIXTURES
    CHUN, BS
    WILKINSON, GT
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 1995, 34 (12) : 4371 - 4377
  • [4] Interfacial tension of ethanol, water, and their mixtures in high pressure carbon dioxide: Measurements and modeling
    Fabien, Aymeric
    Lefebvre, Guillaume
    Calvignac, Brice
    Legout, Pierre
    Badens, Elisabeth
    Crampon, Christelle
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2022, 613 : 847 - 856
  • [5] Measurement and modeling of high pressure density and interfacial tension of carbon dioxide plus tetrahydrofuran mixture
    Matias Garrido, Jose
    Cartes, Marcela
    Mejia, Andres
    Algaba, Jesus
    Manuel Miguez, Jose
    Blas, Felipe J.
    Moreno-Ventas Bravo, Ignacio
    Pineiro, Manuel M.
    JOURNAL OF SUPERCRITICAL FLUIDS, 2017, 128 : 359 - 369
  • [6] Interfacial tension measurements between α-tocopherol and carbon dioxide at high pressures
    Moser, Mirco
    Pietzonka, Werner
    Trepp, Christian
    1996, VCH Verlagsgesellschaft mbH, Weinheim, Germany (19):
  • [7] Density of marine lipids in equilibrium with carbon dioxide
    Seifried, Bernhard
    Temelli, Feral
    JOURNAL OF SUPERCRITICAL FLUIDS, 2009, 50 (02): : 97 - 104
  • [8] Interfacial properties of polystyrene in contact with carbon dioxide
    Enders, S
    Kahl, H
    Winkelmann, J
    FLUID PHASE EQUILIBRIA, 2005, 228 : 511 - 522
  • [9] Interfacial tension of edible oils in supercritical carbon dioxide
    Simoes, PC
    Eggers, R
    Jaeger, PT
    EUROPEAN JOURNAL OF LIPID SCIENCE AND TECHNOLOGY, 2000, 102 (04) : 263 - 265
  • [10] Effect of carbon dioxide on the interfacial tension of polymer melts
    Li, HB
    Lee, LJ
    Tomasko, DL
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2004, 43 (02) : 509 - 514