Experiment and Numerical Simulation of Auto Panel Surface Wrinkle based on Universal Formability Technology

被引：0
|
作者：
Wang, Jinwu [1 ]
Hu, Ping [2 ]
Fu, ZhengChun [1 ,3 ]
Xu, Yanwu [4 ]
机构：
[1] Jilin Univ, Coll Automat Engn, Changchun 130025, Jilin Province, Peoples R China
[2] Dalian Univ Technol, State Key Lab Struct Anal Industrial Experiment, Dalian 116025, Liaoning Prov, Peoples R China
[3] Jilin Univ Technol, Coll Automat Engn, Changchun 130025, Peoples R China
[4] Ford Motor Co, Dept Body Interior & Exterior Sign Off, Dearborn, MI 48121 USA
来源：
2009 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-7, CONFERENCE PROCEEDINGS | 2009年
基金：
中国国家自然科学基金;
关键词：
Wrinkle defect; Universal formability technology; Class "A" surface; Automobile panel;
D O I：
暂无
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Two kinds of experimental dies containing class "A" surface feature of auto body outer panel are designed and manufactured in order to emerge the surface wrinkle of auto body panel. By doing stamping experiment in the dies, the wrinkling phenomenon is observed. At the same time, numerical simulation based on an independently developed commercial CAE software KMAS/UFT of sheet metal forming is carried out. Comparison between experimental and simulated results is done which shows good consistence. And then a Universal Formability Theory called UFT is introduced to optimize the adjustment amount of metal flow and the stamping dies. Some suggestions are given by investigating the adjustment amount and modification of the stamping die.
引用
收藏
页码：4246 / +
页数：2
相关论文
共 50 条
  • [1] Experiment of auto panel surface fracture and simulation base on universal formability technology
    Wang, Jinwu
    Hu, Ping
    Fu, Zhengchun
    Xu, Yanwu
    Nongye Jixie Xuebao/Transactions of the Chinese Society of Agricultural Machinery, 2009, 40 (11): : 227 - 231
  • [2] Numerical simulation of formability of tailor welded blanks for auto door inner panel
    Yu, Tianming, 1600, Chinese Society of Agricultural Engineering (30):
  • [3] Numerical analysis method for wrinkling of auto-body panels based on universal formability theory
    Zhang, Jianwei
    Hu, Ping
    Xu, Yanwu
    Zhang, Xiangkui
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2015, 51 (02): : 103 - 109
  • [4] Research on simulation technology for auto panel in drawing forming Based on Autoform
    Liu, Xifen
    Hu, Yihua
    Huang, Weijian
    MATERIALS PROCESSING TECHNOLOGY, PTS 1-4, 2011, 291-294 : 259 - 262
  • [5] Finite Element Analysis and Elimination of Wrinkling in Auto-body Panels Based on Universal Formability Technology
    Yan, Jie
    Zhang, Xiangkui
    Zhang, Jianwei
    Hu, Ping
    Zheng, Guojun
    11TH INTERNATIONAL CONFERENCE ON NUMERICAL METHODS IN INDUSTRIAL FORMING PROCESSES (NUMIFORM 2013), 2013, 1532 : 876 - 882
  • [6] Finite element analysis and elimination of wrinkling in auto-body panels based on universal formability technology
    Zhang, Jianwei
    Zhang, Xiangkui
    Yan, Jie
    Hu, Ping
    Zheng, Guojun
    INTERNATIONAL JOURNAL OF DAMAGE MECHANICS, 2014, 23 (08) : 1040 - 1054
  • [7] The study of engine hood panel forming based on numerical simulation technology
    Qiu, Hongyang
    Huang, Yajuan
    Liu, Qiang
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 187 : 140 - 144
  • [8] Surface cooling based on the thermomagnetic convection: Numerical simulation and experiment
    Zablotsky, D.
    Mezulis, A.
    Blums, E.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (23-24) : 5302 - 5308
  • [9] Based on the technology of shaped charge numerical simulation and experiment research of ice blasting
    Meng, Wenyuan
    Xin, Liu
    Hu, Junqiang
    MATERIALS PROCESSING AND MANUFACTURING III, PTS 1-4, 2013, 753-755 : 2704 - 2708
  • [10] Study on formability of Tailor Welded Blanks based on numerical simulation
    Liu, Wen
    Xie, Shuisheng
    Li, Jiqiang
    Ding, Xu
    PHYSICAL AND NUMERICAL SIMULATION OF MATERIAL PROCESSING VI, PTS 1 AND 2, 2012, 704-705 : 45 - +
12345