Modelling flow and heat transfer in co-rotating twin-screw extruders

被引：0
|
作者：
Teixeira, C. [1 ]
Faria, R. [1 ]
Covas, J. A. [1 ]
Gaspar-Cunha, A. [1 ]
机构：
[1] Univ Minho, Dept Polymer Engn, Inst Polymer & Composites, Campus Azurem, P-4800058 Guimaraes, Portugal
来源：
10TH ESAFORM CONFERENCE ON MATERIAL FORMING, PTS A AND B | 2007年 / 907卷
关键词：
modelling; polymer extrusion; co-rotating twin screw extruder;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This work presents a modelling routine of co-rotating twin-screw extrusion, from hopper to die. The program accounts for a sequence of individual stages linked together by boundary conditions, namely starve-fed solids conveying, solids conveying under pressure, delay, melting, melt conveying without pressure and melt conveying under pressure. It predicts the evolution along the screw and die of temperature, shear rate, residence time, viscosity, mechanical power consumption, pressure and fill ratio. The results obtained showed adequate sensitivity to changes in operating conditions and screw geometry and are in agreement with current theoretical and experimental knowledge.
引用
收藏
页码：980 / +
页数：2
相关论文
共 50 条
  • [1] Modelling flow and heat transfer in co-rotating twin-screw extruders
    Teixeira, C.
    Faria, R.
    Covas, J. A.
    Gaspar-Cunha, A.
    [J]. 10TH ESAFORM CONFERENCE ON MATERIAL FORMING, PTS A AND B, 2007, 907 : 957 - +
  • [2] Polypropylene Degradation on Co-Rotating Twin-Screw Extruders
    Altepeter, Matthias
    Schoeppner, Volker
    Wanke, Sven
    Austermeier, Laura
    Meinheit, Philipp
    Schmidt, Leon
    [J]. POLYMERS, 2023, 15 (09)
  • [3] Distributive mixing profiles for co-rotating twin-screw extruders
    Shearer, G
    Tzoganakis, C
    [J]. ADVANCES IN POLYMER TECHNOLOGY, 2001, 20 (03) : 169 - 190
  • [4] MECHANISMS OF MIXING IN SINGLE AND CO-ROTATING TWIN-SCREW EXTRUDERS
    LAWAL, A
    KALYON, DM
    [J]. POLYMER ENGINEERING AND SCIENCE, 1995, 35 (17): : 1325 - 1338
  • [5] Mechanistic modeling of modular co-rotating twin-screw extruders
    Eitzlmayr, Andreas
    Koscher, Gerold
    Reynolds, Gavin
    Huang, Zhenyu
    Booth, Jonathan
    Shering, Philip
    Khinast, Johannes
    [J]. INTERNATIONAL JOURNAL OF PHARMACEUTICS, 2014, 474 (1-2) : 157 - 176
  • [6] Melting of homopolymers in co-rotating, intermeshing twin-screw extruders
    Busby, F
    McCullough, TW
    Hughes, KR
    Kirk, RO
    [J]. ANTEC '96: PLASTICS - RACING INTO THE FUTURE, VOLS I-III: VOL I: PROCESSING; VOL II: MATERIALS; VOL III: SPACIAL AREAS, 1996, 42 : 3571 - 3576
  • [7] DESIGN OF TIGHTLY INTERMESHING CO-ROTATING TWIN-SCREW EXTRUDERS
    POTENTE, H
    ANSAHL, J
    KLARHOLZ, B
    [J]. INTERNATIONAL POLYMER PROCESSING, 1994, 9 (01) : 11 - 25
  • [8] ADVANCES IN THE DEVELOPMENT OF TWIN-SCREW EXTRUDERS WITH INTERMESHING CO-ROTATING SCREWS
    STADE, KH
    [J]. KUNSTSTOFFE-GERMAN PLASTICS, 1983, 73 (06): : 287 - 290
  • [9] Melting of polymer blends in co-rotating intermeshing, twin-screw extruders
    Busby, F
    McCullough, TW
    Hughes, KR
    Kirk, RO
    [J]. ANTEC'97 - PLASTICS SAVING PLANET EARTH, CONFERENCE PROCEEDINGS, VOLS 1 - 3, 1997, : 3680 - 3683
  • [10] An integrated approach for numerical analysis of coupled flow and heat transfer in co-rotating twin screw extruders
    Kalyon, D. M.
    Malik, M.
    [J]. INTERNATIONAL POLYMER PROCESSING, 2007, 22 (03) : 293 - 302
12345