Experimental Studies on the Use of Pyrolysis Oil for Diesel Engine Applications and Optimization of Engine Parameters of Injection Timing, Injector Opening Pressure and Injector Nozzle Geometry

被引：9
|
作者：
Sudershan, B. G. [1 ]
Kamoji, M. A. [2 ]
Rampure, P. B. [3 ]
Banapurmath, N. R. [4 ]
Khandal, S. V. [4 ]
机构：
[1] AG Patil Inst Technol, Dept Mech Engn, Solapur, India
[2] KLE Dr MSS Coll Engn & Technol, Dept Mech Engn, Belagavi, Karnataka, India
[3] KLE Coll Engn & Technol, Dept Mech Engn, Chikodi, Karnataka, India
[4] BVB Coll Engn & Technol, Dept Mech Engn, Hubballi, Karnataka, India
来源：
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING | 2018年 / 43卷 / 09期
关键词：
Tire pyrolysis oil (TPO); Injection strategies; Performance; Emission characteristics; EMISSION CHARACTERISTICS; METHYL-ESTER; BIO-DIESEL; HONGE OIL; PERFORMANCE; COMBUSTION; BLENDS; FUEL; HOME;
D O I：
10.1007/s13369-017-2921-4
中图分类号：
O [数理科学和化学]; P [天文学、地球科学]; Q [生物科学]; N [自然科学总论];
学科分类号：
07 ; 0710 ; 09 ;
摘要：
The fossil fuels are not considered as sustainable energy sources due to their continuous depletion. To overcome this issue, alternative fuels are required to be used in diesel engine applications. Present paper investigates the performance of tire pyrolysis oil (TPO)-fueled diesel engine with minor modification in the engine operating parameters such as injection timing (IT), injector opening pressure (IOP) and nozzle geometry. Initially, experimentations are carried out to optimize the IT for which the best brake thermal efficiency (BTE) is revealed. In the next phase of the work, the effect of IOP and nozzle geometry on the performance was studied. For the diesel engine operation with TPO as fuel, it has been reported that IT of 27 degrees BTDC, IOP of 240 bar and injector of 5 holes yield better performance in terms of BTE with reduced emissions.
引用
收藏
页码：4517 / 4530
页数：14
相关论文
共 50 条
  • [1] Experimental Studies on the Use of Pyrolysis Oil for Diesel Engine Applications and Optimization of Engine Parameters of Injection Timing, Injector Opening Pressure and Injector Nozzle Geometry
    B. G. Sudershan
    M. A. Kamoji
    P. B. Rampure
    N. R. Banapurmath
    S. V. Khandal
    [J]. Arabian Journal for Science and Engineering, 2018, 43 : 4517 - 4530
  • [2] Effects of injection timing, injector opening pressure and nozzle geometry on the performance of cottonseed oil methyl ester-fuelled diesel engine
    Suresh, G.
    Kamath, H. C.
    Banapurmath, N. R.
    [J]. INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING, 2014, 7 (01) : 82 - 92
  • [3] Effect of injection timing, injector opening pressure, injector nozzle geometry, and swirl on the performance of a direct injection, compression-ignition engine fuelled with honge oil methyl ester (HOME)
    A. V. Tumbal
    N. R. Banapurmath
    P. G. Tewari
    [J]. International Journal of Automotive Technology, 2016, 17 : 35 - 50
  • [4] EFFECT OF INJECTION TIMING INJECTOR OPENING PRESSURE, INJECTOR NOZZLE GEOMETRY, AND SWIRL ON THE PERFORMANCE OF A DIRECT INJECTION, COMPRESSION-IGNITION ENGINE FUELLED WITH HONGE OIL METHYL ESTER (HOME)
    Tumbal, A. V.
    Banapurmath, N. R.
    Tewari, P. G.
    [J]. INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2016, 17 (01) : 35 - 50
  • [5] Experimental Studies of Fuel Injection in a Diesel Engine with an Inclined Injector
    Kamaltdinov, V. G.
    Markov, V. A.
    Lysov, I. O.
    Zherdev, A. A.
    Furman, V. V.
    [J]. ENERGIES, 2019, 12 (14)
  • [6] Investigation on the effect of the flow passage geometry of diesel injector nozzle on injection process parameters and engine performances
    Markov, Vladimir
    Sa, Bowen
    Kamaltdinov, Vyacheslav
    Neverov, Vsevolod
    Zherdev, Anatoly
    [J]. ENERGY SCIENCE & ENGINEERING, 2022, 10 (02) : 552 - 577
  • [7] Effect of injection timing, injector opening pressure and nozzle geometry on the performance of a compression ignition engine operated on non-edible oil methyl esters from different sources
    Wategave, S. P.
    Sawant, M. S.
    Tandale, M. S.
    Suresh, G.
    Yaliwal, V. S.
    Banapurmath, N. R.
    Tewari, P. G.
    [J]. INTERNATIONAL JOURNAL OF SUSTAINABLE ENGINEERING, 2014, 7 (01) : 71 - 81
  • [8] Analysis of diesel engine injector nozzle spray characteristics fueled with residual fuel oil
    Achebe, C. H.
    Ogunedo, B. M. O.
    Chukwuneke, J. L.
    Anosike, N. B.
    [J]. HELIYON, 2020, 6 (08)
  • [9] Combined effects of fuel injection pressure and injector nozzle holes on the performance of preheated palm oil methyl ester used in a diesel engine
    Walle Mekonen, Menelik
    Sahoo, Niranjan
    [J]. BIOFUELS-UK, 2020, 11 (01): : 19 - 35
  • [10] Implementation of Common Rail Direct Injection System and Optimization of Fuel Injector Parameters in an Experimental Single-Cylinder Diesel Engine
    Teoh, Yew Heng
    How, Heoy Geok
    Peh, Ching Guan
    Le, Thanh Danh
    Nguyen, Huu Tho
    [J]. PROCESSES, 2020, 8 (09)
12345