Punching shear strengthening of flat-slabs with CFRP dowels

被引：18
|
作者：
Erdogan, H. [1 ]
Binici, B. [1 ]
Ozcebe, G. [1 ]
机构：
[1] Kocaeli Univ, Dept Civil Engn, TR-41380 Kocaeli, Turkey
来源：
MAGAZINE OF CONCRETE RESEARCH | 2010年 / 62卷 / 07期
关键词：
FIBER-REINFORCED POLYMERS; COLUMN CONNECTIONS; PLATES; SHEETS;
D O I：
10.1680/macr.2010.62.7.465
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
An economical and easy-to-install strengthening method to enhance the punching shear capacity of slab-column connections in existing deficient flat-plate structures is presented in this study. Seven specimens representing typical interior slab-column connections were tested and experimental results are reported in detail. The strengthening scheme employs the use of in-house fabricated carbon fibre reinforced polymer (CFRP) dowels placed around the column stubs in different numbers and arrangements as vertical shear reinforcement. The test results indicated that the ultimate punching shear capacity of the strengthened specimens improved up to 1.33 times that of the specimen without any strengthening. The experimental punching shear capacities and observed failure modes of the specimens were compared with the estimations of strength and failure modes given by the punching shear strength provisions of three different concrete design codes.
引用
收藏
页码：465 / 478
页数：14
相关论文
共 50 条
  • [1] Post-installed punching shear reinforcement for strengthening of flat-slabs
    Muttoni, A.
    Ruiz, M. Fernandez
    Kunz, J.
    BAUINGENIEUR, 2008, 83 : 503 - 511
  • [2] Punching Shear Strengthening of Two-Way Flat Slabs with CFRP Grids
    Meisami, M. Hasan
    Mostofinejad, Davood
    Nakamura, Hikaru
    JOURNAL OF COMPOSITES FOR CONSTRUCTION, 2014, 18 (02)
  • [3] Punching shear strengthening of two-way flat slabs using CFRP rods
    Meisami, M. Hasan
    Mostofinejad, Davood
    Nakamura, Hikaru
    COMPOSITE STRUCTURES, 2013, 99 : 112 - 122
  • [4] Flat slabs strengthened to punching with carbon fiber reinforced polymer (CFRP) dowels
    da Silva Rodrigues, Helder Luiz
    da Silva, Priscila Moreira
    Carvalho de Oliveira, Denio Ramam
    ACTA SCIENTIARUM-TECHNOLOGY, 2015, 37 (04) : 323 - 330
  • [5] Strengthening of flat slabs with FRP fan for punching shear
    Meisami, M. Hasan
    Mostofinejad, Davood
    Nakamura, Hikaru
    COMPOSITE STRUCTURES, 2015, 119 : 305 - 314
  • [6] Effect of CFRP and TRM Strengthening of RC Slabs on Punching Shear Strength
    Abbas, Husain
    Abadel, Aref A.
    Almusallam, Tarek
    Al-Salloum, Yousef
    LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES, 2015, 12 (09): : 1616 - 1640
  • [7] Punching CFRP-based strengthening solutions for reinforced concrete flat slabs
    Santos, Galileu S.
    Melo, Guilherme S. S. A.
    Barros, Joaquim A. O.
    COMPOSITE STRUCTURES, 2019, 224
  • [8] Punching shear strengthening of flat slabs with EBROG and EBRIG - FRP strips
    Amiri, Somayeh
    Talaeitaba, Sayed Behzad
    STRUCTURES, 2020, 26 : 139 - 155
  • [9] Punching shear strengthening of RC slabs using L-CFRP laminates
    Saleh, Haifa
    Kalfat, Robin
    Abdouka, Kamiran
    Al-Mahaidi, Riadh
    ENGINEERING STRUCTURES, 2019, 194 : 274 - 289
  • [10] Punching shear strength of flat slabs strengthened with internal flexible CFRP patches
    Assi, Malik H.
    Taresh, Noor S.
    4TH INTERNATIONAL CONFERENCE ON BUILDINGS, CONSTRUCTION AND ENVIRONMENTAL ENGINEERING, 2020, 737
12345