Effect of Post Weld Heat Treatment on Strength and Microstructure of Friction Stir Welded Lap Joints of AA2014-T6 Aluminum Alloy

被引：6
|
作者：
Rajendran, C. [1 ]
Srinivasan, K. [2 ]
Balasubramanian, V. [2 ]
Balaji, H. [3 ]
Selvaraj, P. [3 ]
机构：
[1] Sri Krishna Coll Engn & Technol, Coimbatore, Tamil Nadu, India
[2] Annamalai Univ, Annamalainagar, Tamil Nadu, India
[3] Aeronaut Dev Agcy, Bangalore, Karnataka, India
来源：
METAL SCIENCE AND HEAT TREATMENT | 2019年 / 61卷 / 5-6期
关键词：
aluminum alloy; friction stir welding; post weld heat treatment; strength; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; BEHAVIOR;
D O I：
10.1007/s11041-019-00421-2
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
Lap joints of AA2014 aluminum alloy produced by friction stir welding and subjected to post weld heat treatment have been studied. The shear strength and hardness of the welded joints were determined. The structure of the weld and weld-affected zone was studied. A fractographic analysis of the fracture surface of the tested samples was performed. The post weld heat treatment modes were established to enable recovery of the mechanical properties of the welded joints.
引用
收藏
页码：305 / 310
页数：6
相关论文
共 50 条
  • [1] Effect of Post Weld Heat Treatment on Strength and Microstructure of Friction Stir Welded Lap Joints of AA2014-T6 Aluminum Alloy
    C. Rajendran
    K. Srinivasan
    V. Balasubramanian
    H. Balaji
    P. Selvaraj
    Metal Science and Heat Treatment, 2019, 61 : 305 - 310
  • [2] Effect of tool tilt angle on strength and microstructural characteristics of friction stir welded lap joints of AA2014-T6 aluminum alloy
    Rajendran, C.
    Srinivasan, K.
    Balasubramanian, V
    Balaji, H.
    Selvaraj, P.
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2019, 29 (09) : 1824 - 1835
  • [3] Evaluation of nickel shot peening process on strength of friction stir welded AA2014-T6 aluminum alloy joints
    Mallieswaran, K.
    Rajendran, C.
    Padmanabhan, R.
    Rajasekaran, S.
    PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY, 2023, 60 (07): : 442 - 460
  • [4] Effect of post weld heat treatment and welding parameters on mechanical and corrosion characteristics of friction stir welded aluminium alloy AA2014-T6
    Kannusamy, Ashok S.
    Ramasamy, Ravindran
    TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2019, 43 (02) : 230 - 236
  • [5] Effect of backing plate on strength and microstructural characteristics of friction stir welded AA2014-T6 aluminium alloy joints
    Raja, S.
    Manikumar, R.
    Benruben, R.
    Ragunathan, S.
    MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 895 - 899
  • [6] A fuzzy model to predict the mechanical characteristics of friction stir welded joints of aluminum alloy AA2014-T6
    Ashok, S. K.
    Sathya, S. Ponni Alias
    AERONAUTICAL JOURNAL, 2023, 127 (1311): : 818 - 830
  • [7] Effect of process parameters on the corrosion characteristics of friction stir welded aluminum alloy AA2014-T6
    Ashok, S. K.
    Shanmugam, D.
    Sathya, S. Ponni Alias
    Jayaraj, M.
    AERONAUTICAL JOURNAL, 2025,
  • [8] Enhancing tensile properties of pulsed CMT–MIG welded high strength AA2014-T6 alloy joints: Effect of post weld heat treatment
    Rajendran C.
    Sonar T.
    Ivanov M.
    Sandeep C.
    Shanthi C.
    Gurajala N.K.
    Balachandar K.
    Xu J.
    International Journal of Lightweight Materials and Manufacture, 2024, 7 (02) : 344 - 352
  • [9] Identifying combination of friction stir welding parameters to maximize strength of lap joints of AA2014-T6 aluminium alloy
    Rajendran, C.
    Srinivasan, K.
    Balasubramanian, V
    Balaji, H.
    Selvaraj, P.
    AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2019, 17 (02) : 64 - 75
  • [10] Effect of post weld heat treatment on mechanical properties of friction stir welded joints for 2219-T6 aluminum alloy
    School of Power and Mechanical Engineering, Wuhan University, Wuhan, China
    不详
    Cailiao Rechuli Xuebao, 3 (35-39):
12345