Design System Development of Tool Magazine for CNC Machine Tools

被引：1
|
作者：
Sheng, Zhongqi [1 ]
Xie, Hualong [1 ]
Xu, Zhiwei [1 ]
Li, Peng [1 ]
机构：
[1] Northeastern Univ, Sch Mech Engn & Automat, Shenyang, Peoples R China
来源：
E-ENGINEERING & DIGITAL ENTERPRISE TECHNOLOGY VII, PTS 1 AND 2 | 2009年 / 16-19卷
关键词：
Tool magazine; CNC machine tools; CNC machining centre; Parametric design; UG;
D O I：
10.4028/www.scientific.net/AMM.16-19.155
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
As an important part of CNC machine tools and machining center, automatic tool changer is the basis to realize continuous processing of multiple machining operations. The design system development of tool magazine is an engineering of complex system. Based on the secondary development technology of UG, this paper developed the design and management system of tool magazine and realized the standardization and the process of design procedure. After introducing the basic idea of design system development, this paper presented function modules and design workflow of tool magazine respectively. The management system for tool magazine was given next. UG-based development of tool magazine for CNC machine tools can meet the design need and improve the design quality effectively.
引用
收藏
页码：155 / 159
页数：5
相关论文
共 50 条
  • [1] DESIGN OF MONITORING SYSTEM FOR CNC MACHINE TOOLS
    Cisar, Miroslav
    Kuric, Ivan
    Vlcek, Stefan
    [J]. 2016 INTERNATIONAL CONFERENCE ON PRODUCTION RESEARCH - REGIONAL CONFERENCE AFRICA, EUROPE AND THE MIDDLE EAST (ICPR-AEM 2016) AND 4TH INTERNATIONAL CONFERENCE ON QUALITY AND INNOVATION IN ENGINEERING AND MANAGEMENT (QIEM 2016), 2016, : 354 - 357
  • [2] Design of the clamping system for the CNC machine tool
    Cisar, Miroslav
    Kuric, Ivan
    Cubonova, Nadezda
    Kandera, Matej
    [J]. MODERN TECHNOLOGIES IN MANUFACTURING (MTEM 2017 - AMATUC), 2017, 137
  • [3] Modeling and design of servo system of CNC machine tools
    Zheng, Jinxing
    Zhang, Mingjun
    Meng, Qingxin
    [J]. IEEE ICMA 2006: PROCEEDING OF THE 2006 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS AND AUTOMATION, VOLS 1-3, PROCEEDINGS, 2006, : 1964 - +
  • [4] Expert system design for fault diagnosing in CNC machine tools
    Unsacar, F
    Halkaci, S
    Majlessi, A
    [J]. INTEGRAL METHODS IN SCIENCE AND ENGINEERING, 2000, 418 : 327 - 332
  • [5] Configuration Design of Product Service System for CNC Machine Tools
    Sheng, Zhongqi
    Xu, Tao
    Song, Junyou
    [J]. ADVANCES IN MECHANICAL ENGINEERING, 2015, 7 (02)
  • [6] Design Teaching Machine Tool of Open CNC System on PC
    Lu Yong
    Liu Yunqiang
    [J]. DIGITAL MANUFACTURING & AUTOMATION III, PTS 1 AND 2, 2012, 190-191 : 774 - 777
  • [7] Integrated design and analysis system for feed drive system of CNC machine tools
    Liu, Lin-Yan
    Wang, Hui-Fen
    [J]. INTERNATIONAL JOURNAL OF COMPUTER APPLICATIONS IN TECHNOLOGY, 2016, 53 (02) : 172 - 182
  • [8] Design of Electric Spindle Control System for HighGrade CNC Machine Tools
    Liang, Jinhua
    Xu, Haiping
    Liu, Wei
    [J]. 2023 IEEE INTERNATIONAL CONFERENCE ON ELECTRICAL SYSTEMS FOR AIRCRAFT, RAILWAY, SHIP PROPULSION AND ROAD VEHICLES & INTERNATIONAL TRANSPORTATION ELECTRIFICATION CONFERENCE, ESARS-ITEC, 2023,
  • [9] Development of a Measurement System for Five-Axis CNC Machine Tools
    Jywe, Wen-Yuh
    Liu, Chien-Hung
    Li, Yi-tsung
    Lin, Yu Shan
    Hsu, Tung-Hui
    Hsieh, Wen-Hsiang
    Lam, D. K. T.
    Ji, L. W.
    [J]. PROCEEDINGS OF THE THIRD INTERNATIONAL SYMPOSIUM ON TEST AUTOMATION & INSTRUMENTATION, VOLS 1 - 4, 2010, : 1346 - 1350
  • [10] The development of a triple ball bar system for calibration of CNC machine tools
    Jywe, Wenyuh
    Liu, Chien Hung
    Lin, Bor Jeng
    Hsu, Tung Hui
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2006, 220 (05) : 759 - 766
12345