Study of a vertical boiling flow in rectangular mini-channels

Mini-channel heat exchangers with boiling flows present optimal performances: they are highly efficient and compact and require low fluid mass. However, classical correlations for two-phase flow in macro-channels fail in predicting the heat transfer coefficient and the eventual premature dry-out in mini-channels. Therefore, new studies are needed to provide better knowledge on flow boiling phenomena in small, confined spaces. The proposed paper presents an experimental study of vertical flow boiling in mini-channels. The pressure drop and the heat transfer coefficient in the test section have been measured for a variety of conditions. Different heat flux, inlet vapor quality, and mass flow rate values have been tested. A critical dry-out vapor quality depending on the mass flow rate has been found. Nevertheless, the superficial velocity appears to be much more appropriate than the vapor quality or the mass flow rate for the dry-out occurrence prediction. A clean dependence with a single critical velocity value has been found.