UNDERWATER WET REPAIR WELDING OF API 5L X65M PIPELINE STEEL

被引：25

作者：

Rogalski, Grzegorz ^{[1
]}

Fydrych, Dariusz ^{[1
]}

Labanowski, Jerzy ^{[1
]}

机构：

[1] Gdansk Univ Technol, Fac Mech Engn, Gdansk, Poland

来源：

POLISH MARITIME RESEARCH | 2017年 / 24卷

关键词：

underwater welding; wet welding; underwater pipeline; API 5L X65M steel; MECHANICAL-PROPERTIES; FATIGUE-STRENGTH; STAINLESS-STEEL; COLD CRACKING; MICROSTRUCTURE; JOINTS; IMPACT;

D O I：

10.1515/pomr-2017-0038

中图分类号：

U6 [水路运输]; P75 [海洋工程];

学科分类号：

0814 ; 081505 ; 0824 ; 082401 ;

摘要：

This paper presents results of the research of effect of polymer insulation of pipeline made of API 5L X65M steel as well as underwater wet welding parameters on properties of joints made by covered electrodes. Effect of heat input on structure and hardness of joints during repair of underwater pipeline was analyzed. Welding defects like microcracks, micro-lacks of fusion, slag inclusions, as well as HAZ hardness increase over an assumed acceptance criterion for welded joints in pipes without anticorrosion polymer insulation, were identified. A significant effect of polimer insulation on structure and properties of welded joints, was found.

引用

页码：188 / 194

页数：7

共 50 条

[1] OPPORTUNITIES OF NARROW GAP MAG WELDING OF API 5L X65M STEEL PIPELINE
Simionescu, Dinu
Mitelea, Ion
Burca, Mircea
METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2017, : 699 - 704
[2] Research on the nondestructive examination of narrow gap MAG welding of API 5L X65M thermomechanical treated steel
Simionescu, Dinu
Mitelea, Ion
Karancsi, Olimpiu
Utu, Ion-Dragos
MATERIALS TODAY-PROCEEDINGS, 2021, 45 : 4105 - 4111
[3] INVESTIGATION INTO COLD CRACKING IN UNDERWATER WET WELDING OF API 5L X70 STEEL
Garasic, Ivica
Kralj, Slobodan
Kozuh, Zoran
TRANSACTIONS OF FAMENA, 2009, 33 (03) : 25 - 34
[4] Electron Beam Welding of API 5L X65 Steel
F. C. Pinto
H. R. Z. Sandim
Journal of Materials Engineering and Performance, 2024, 33 : 2513 - 2522
[5] Electron Beam Welding of API 5L X65 Steel
Pinto, F. C.
Sandim, H. R. Z.
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (05) : 2513 - 2522
[6] Failure Analysis of Cracks Formed at Extrados of Bend Pipe of API 5L X65M Grade
Shant, J. Raghu
Pandey, Bijay K.
Goyal, Rajesh K.
Kathayat, T. S.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION, 2013, 13 (05) : 531 - 537
[7] Investigation of the hydrogen induced cracking behaviour of API 5L X65 pipeline steel
Jack, Tonye Alaso
Pourazizi, Reza
Ohaeri, Enyinnaya
Szpunar, Jerzy
Zhang, Jiming
Qu, Jinbo
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2020, 45 (35) : 17671 - 17684
[8] Evaluation of stresses generated by welding in API 5L X65 steel using acoustoelasticity
Santos, Auteliano A.
Andrino, Marcilio Haddad
Bray, Don E.
Trevisan, Roseana E.
MATERIALS EVALUATION, 2008, 66 (08) : 858 - 864
[9] Microstructures and mechanical properties of friction hydro-pillar processing overlap welding in API 5L X65 pipeline steel
Xu, Y. C.
Jing, H. Y.
Jia, Q. S.
Han, Y. D.
Xu, L. Y.
WELDING IN THE WORLD, 2018, 62 (02) : 325 - 338
[10] Low Cycle Fatigue Behaviour of API 5L X65 Pipeline Steel at Room Temperature
Fatoba, Olusegun
Akid, Robert
XVII INTERNATIONAL COLLOQUIUM ON MECHANICAL FATIGUE OF METALS (ICMFM17), 2014, 74 : 279 - 286

← 1 2 3 4 5 →