Turning of stainless steel with worn tools having chamfered main cutting edges

被引：11

作者：

Chang, CS ^{[1
]}

机构：

[1] Natl I Lan Inst Agr & Technol, Dept Mech Engn, I Lan 26014, Taiwan

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 1998年 / 38卷 / 04期

关键词：

D O I：

10.1016/S0890-6955(97)00046-1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A force model is proposed in this study for a single-point tool with a chamfered main cutting edge incorporating a wear factor. The variations of shear plane areas occurring in the tool-worn situation are also used, Cutting experiments are conducted on stainless steel bars and the experimental data correlated closely with the theoretical values. A preliminary discussion is also made of the design of special tool holders and their geometrical configurations. The tool holders were milled using medium carbon-steel bars and these holders with the mounting tips were ground to fit various specifications. (C) 1998 Elsevier Science Ltd. All rights reserved.

引用

页码：291 / 313

页数：23

共 50 条

[1] TURNING OF STAINLESS-STEEL WITH CHAMFERED MAIN CUTTING EDGE TOOLS
FUH, KH
CHANG, CS
[J]. MATERIALS AND MANUFACTURING PROCESSES, 1995, 10 (03) : 473 - 492
[2] A Study of the Cutting Temperatures of Turning Stainless Steels with Chamfered Main Cutting Edge Nose Radius Worn Tools
Chang, Chung-Shin
[J]. ADVANCES IN ABRASIVE TECHNOLOGY XIII, 2010, 126-128 : 760 - 766
[3] A Study on Cutting Temperatures of Turning Stainless Steel with Chamfered Main Cutting Edge Nose Radius Tools
Chang, Chung-Shin
[J]. PROCEEDINGS OF THE ASME MICRO/NANOSCALE HEAT AND MASS TRANSFER INTERNATIONAL CONFERENCE, VOL 3, 2010, : 1 - 12
[4] Prediction of the cutting temperatures of stainless steel with chamfered main cutting edge tools
Chang, Chung-Shin
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 190 (1-3) : 332 - 341
[5] Predicting Cutting Temperatures When Turning Stainless Steel with Worn Tools
Chang, Chung-Shin
Lo, Chih-Yao
Wu, Chen-Feng
[J]. JOURNAL OF THE CHINESE SOCIETY OF MECHANICAL ENGINEERS, 2009, 30 (03): : 189 - 198
[6] A Study of the Cutting Temperatures in Milling Stainless Steels Using Chamfered Main Cutting Edge Sharp Worn Tools
Chang, Chung-Shin
[J]. ADVANCED MATERIALS AND INFORMATION TECHNOLOGY PROCESSING II, 2012, 586 : 295 - 301
[7] A force model of turning stainless steel with worn tools having nose radius
Chang, CS
Tsai, GC
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 142 (01) : 112 - 130
[8] A force model for nose radius worn tools with a chamfered main cutting edge
Chang, CS
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1998, 38 (12): : 1467 - 1498
[9] A Study of Cutting Temperatures in Turning Carbon-Fiber-Reinforced-Plastics Materials Using Chamfered Main Cutting Edge Sharp Worn Tools
Chang, Chung-Shin
Chen, Cheng-Hu
[J]. CEIT 2012: 2012 INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING AND INFORMATION TECHNOLOGY, 2012, : 1 - 8
[10] PREDICTION OF THE CUTTING TEMPEERATURES OF TURNING STAINLESS STEELS WITH NOSE RADIUS WORN TOOLS
Chang, Chung-Shin
[J]. PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION 2010, VOL 3, PTS A AND B, 2012, : 843 - 849

← 1 2 3 4 5 →