Optimization Of Electroless Copper Coating Parameters On Graphite Particles Using Taguchi And Grey Relational Analysis

被引：10

作者：

Deepthi, Y. P. ^{[1
]}

Krishna, M. ^{[2
]}

机构：

[1] Amrita Univ, Amrita Vishwa Vidyapeetham, Amrita Sch Engn, Dept Mech Engn, Bengaluru, India

[2] RV Coll Engn, Dept Mech Engn, Bangalore, Karnataka, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2018年 / 5卷 / 05期

关键词：

Electroless process; Taguchi method; Grey relational Analysis; ANOVA; METAL-MATRIX COMPOSITES; PTFE COMPOSITES; BEHAVIOR; WEAR; FRICTION; FIBER;

D O I：

10.1016/j.matpr.2018.02.183

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Electroless process is employed to get uniform coating of copper on graphite particles. Electroless coating process was performed based on Taguchi L16 orthogonal array. Optimal coating parameters were determined by Taguchi method using Grey Relational Analysis. ANOVA technique was further employed to know the optimal parameters from grey relational grade. The present study is to maximize thermal conductivity and coating thickness characteristics of electroless copper coated graphite, by optimizing the four coating parameters viz. composition of zinc, copper sulphate, graphite and sensitization time. Microstructural aspects were studied through SEM analysis. (C) 2017 Elsevier Ltd. All rights reserved. Selection and/or Peer-review under responsibility of International Conference on Materials Manufacturing and Modelling (ICMMM - 2017).

引用

页码：12077 / 12082

页数：6

共 50 条

[1] Tribological characteristics of electroless Ni-B coating and optimization of coating parameters using Taguchi based grey relational analysis
Das, Suman Kalyan
Sahoo, Prasanta
[J]. MATERIALS & DESIGN, 2011, 32 (04) : 2228 - 2238
[2] Tribological behavior of electroless Ni-P coatings in alkaline environment and optimization of coating parameters using Taguchi based grey relational analysis
Department of Mechanical Engineering, Jadavpur University, Kolkata
700 032, India
[J]. Indian J. Eng. Mater. Sci., 5 (503-512):
[3] Tribological behavior of electroless Ni-P coatings in alkaline environment and optimization of coating parameters using Taguchi based grey relational analysis
Panja, Bikash
Sahoo, Prasanta
[J]. INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES, 2015, 22 (05) : 503 - 512
[4] Optimization of Lathe Cutting Parameters Using Taguchi Method and Grey Relational Analysis
Jian, Bo-Lin
Wang, Cheng-Chi
Yau, Her-Terng
Wu, Li-Wei
Tian, An-Hong
[J]. SENSORS AND MATERIALS, 2020, 32 (03) : 843 - 858
[5] Optimization of squeeze cast process parameters using taguchi and grey relational analysis
Patel, Manjunath G. C.
Krishna, Prasad
Parappagoudar, Mahesh B.
[J]. 2ND INTERNATIONAL CONFERENCE ON INNOVATIONS IN AUTOMATION AND MECHATRONICS ENGINEERING, ICIAME 2014, 2014, 14 : 157 - 164
[6] Optimization of wear parameters for AISI 4140 using Taguchi grey relational analysis
Rooprai, Ranbir Singh
Singh, Talvinder
Rana, Mohit
Sharma, Vijay Kumar
[J]. MATERIALS TODAY-PROCEEDINGS, 2022, 50 : 293 - 296
[7] Investigation of process parameters of ultrasonic welding of copper using Taguchi and grey relational analysis
Siddani, Jush Kumar
Srinvas, C.
Reddy, N. Madan Mohan
Naik, L. Srinvias
[J]. MATERIALS TODAY-PROCEEDINGS, 2021, 44 : 827 - 831
[8] Tribological Performance Optimization of Electroless Ni–P Coatings Using the Taguchi Method and Grey Relational Analysis
Prasanta Sahoo
Sujan Kumar Pal
[J]. Tribology Letters, 2007, 28 : 191 - 201
[9] Optimisation of tribological performance of electroless Ni-B coating using Taguchi method and grey relational analysis
Das, S. Kalyan
Sahoo, P.
[J]. TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2011, 5 (01) : 16 - 24
[10] Optimization of process parameters for Peripheral Milling operation using Taguchi Grey Relational Analysis
Rajendran, Shyamraj
Rasheedali, Shiyas Chekkot
[J]. INTERNATIONAL CONFERENCE ON APPLIED MECHANICS AND OPTIMISATION (ICAMEO-2019), 2019, 2134

← 1 2 3 4 5 →