Model tests of silo discharge in a geotechnical centrifuge

被引:17
|
作者
Mathews, J. C. [1 ]
Wu, Wei [1 ]
机构
[1] Univ Nat Resources & Life Sci BOKU, Inst Geotech, Feistmantelstr 4, A-1180 Vienna, Austria
关键词
Silo discharge; Granular material; Model test; Geotechnical centrifuge; PARTICLE IMAGE VELOCIMETRY;
D O I
10.1016/j.powtec.2015.11.025
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Scaled models are often used to study the behaviour of silo discharge, however the effects of gravity on silo discharge have not yet been quantified. In this paper, the effects of gravity on silo discharge and internal flow patterns are investigated with reference to the widely used Beverloo correlation. Discharge rate is predicted to be proportional to the square root of gravity and this is demonstrated using experimental results from a novel silo centrifuge model. The effects of changes in gravity on the internal flow profile are also investigated. It is shown that the width of the flow channel at any given height above the outlet is independent of gravity and the local velocity of discharging material is proportional to the square root of gravitational acceleration. These observations show that the angle at which a stagnant zone intercepts a silo wall is independent of gravity and that the criteria for funnel or mass flow conditions are independent of gravity. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码:3 / 14
页数:12
相关论文
共 50 条
  • [1] GEOTECHNICAL MODEL TESTS OF BEARING CAPACITY PROBLEMS IN A CENTRIFUGE
    KIMURA, T
    KUSAKABE, O
    SAITOH, K
    [J]. GEOTECHNIQUE, 1985, 35 (01): : 33 - 45
  • [2] Bayesian Model Calibration Using Geotechnical Centrifuge Tests
    Zhang, L. L.
    Tang, W. H.
    Zhang, L. M.
    [J]. JOURNAL OF GEOTECHNICAL AND GEOENVIRONMENTAL ENGINEERING, 2009, 135 (02) : 291 - 299
  • [3] Model tests on ship impact in a revetment performed in a geotechnical centrifuge
    Bezuijen, A
    Schaminée, PEL
    Lee, DM
    [J]. BGA INTERNATIONAL CONFERENCE ON FOUNDATIONS: INNOVATIONS, OBSERVATIONS, DESIGN AND PRACTICE, 2003, : 119 - 128
  • [4] Application of model tests on cohesive bulk solids using silo centrifuge technique
    Grosstück, M
    Schwedes, J
    [J]. POWDER TECHNOLOGY, 2005, 157 (1-3) : 149 - 155
  • [5] Rapid pile load tests in the geotechnical centrifuge
    Holscher, P.
    van Tol, A. F.
    Huy, N. Q.
    [J]. SOILS AND FOUNDATIONS, 2012, 52 (06) : 1102 - 1117
  • [6] Development of layered models for geotechnical centrifuge tests
    Divall, S.
    Stallebrass, S. E.
    Goodey, R. J.
    Ritchie, E. P.
    [J]. PHYSICAL MODELLING IN GEOTECHNICS, VOL 1, 2018, : 143 - 147
  • [7] Numerical Simulation and Analysis of Centrifuge Model Tests with Nonhomogeneous Materials in Geotechnical Engineering
    Tang, Lie-xian
    Guo, Lian-jun
    Zhang, Da-ning
    Zheng, Jian-ming
    [J]. ADVANCES IN CIVIL AND INDUSTRIAL ENGINEERING, PTS 1-4, 2013, 353-356 : 495 - +
  • [8] Development of a test apparatus for staged construction of embankment in geotechnical centrifuge model tests
    Liu, Hong-Yang
    Luo, Qiang
    Wang, Wei-Long
    Li, Pin-Feng
    Ma, Hong-Fei
    Zhang, Dong-Qing
    [J]. Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2022, 56 (08): : 1504 - 1513
  • [9] CENTRIFUGE TESTS FOR GEOTECHNICAL PROJECT ON MUDDY CLAY FOUNDATION
    ZHANG, SD
    CHEN, XL
    [J]. ENGINEERING PROBLEMS OF REGIONAL SOILS, 1989, : 529 - 533
  • [10] Seepage column hydraulic conductivity tests in the geotechnical centrifuge
    van Tonder, W. D.
    Jacobsz, S. W.
    [J]. JOURNAL OF THE SOUTH AFRICAN INSTITUTION OF CIVIL ENGINEERING, 2017, 59 (03) : 16 - 24