Superelastic deformation properties of TiNi shape memory alloy

被引:5
|
作者
Pieczyska, E. [1 ]
Nowacki, W. [1 ]
Sakuragi, T. [2 ]
Tobushi, H. [2 ]
机构
[1] Polish Acad Sci, Inst Fundamental Technol Res, Swietokrzyska 21, PL-00049 Warsaw, Poland
[2] Aichi Inst Technol, Dept Mech Engn, Yakusa, Toyota 4700392, Japan
基金
日本学术振兴会;
关键词
shape memory alloy; superelasticity; energy storage; energy dissipation; damping; strain rate; titanium-nickel alloy; environment;
D O I
10.4028/www.scientific.net/KEM.340-341.1211
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The characteristics of energy storage and dissipation in TiNi shape memory alloys were investigated experimentally based on the superelastic properties under various thermomechanical loading conditions. The results obtained can be summarized as follows. (1) The recoverable strain energy increases in proportion to the rise in temperature, but the dissipated work per unit volume depends slightly on temperature. In the case of low strain rates, the recoverable strain energy and dissipated work do not depend on both the strain rate and the temperature-control led condition. (2) In the case of high strain rates, while the recoverable strain energy decreases and the dissipated work increases in proportion to the rise in strain rate under the temperature-control led condition, the recoverable strain energy increases and the dissipated work decreases under the temperature-uncontrolled condition.
引用
收藏
页码:1211 / +
页数:2
相关论文
共 50 条
  • [1] Cyclic superelastic deformation of TiNi shape-memory alloy
    Gong, JM
    Tobushi, H
    Takata, K
    Okumura, K
    Endo, M
    [J]. SHAPE MEMORY MATERIALS AND ITS APPLICATIONS, 2001, 394-3 : 245 - 248
  • [2] Deformation properties of TiNi shape memory alloy
    Lin, PH
    Tobushi, H
    Tanaka, K
    Ikai, A
    [J]. JSME INTERNATIONAL JOURNAL SERIES A-MECHANICS AND MATERIAL ENGINEERING, 1996, 39 (01): : 108 - 116
  • [3] Superelastic deformation of TiNi shape memory alloy subjected to various subloop loadings
    Department of Mechanical Engineering, Aichi Institute of Technology, Toyota 470-0392, Japan
    不详
    不详
    [J]. Mater. Trans., 1 (217-223):
  • [4] Superelastic deformation of a TiNi shape memory alloy subjected to various cyclic loadings
    Gong, JM
    Tobushi, H
    Takata, K
    Okumura, K
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2002, 216 (L1) : 17 - 23
  • [5] Influence of strain rate on superelastic properties of TiNi shape memory alloy
    Tobushi, H
    Shimeno, Y
    Hachisuka, T
    Tanaka, K
    [J]. MECHANICS OF MATERIALS, 1998, 30 (02) : 141 - 150
  • [6] Cyclic deformation properties of TiNi shape memory alloy
    Tobushi, H
    Shimeno, Y
    Takata, K
    Hashimoto, T
    [J]. JAPAN INSTITUTE OF METALS, PROCEEDINGS, VOL 12, (JIMIC-3), PTS 1 AND 2: SOLID - SOLID PHASE TRANSFORMATIONS, 1999, : 1056 - 1059
  • [7] DEFORMATION PROPERTIES OF TINI SHAPE-MEMORY ALLOY
    TOBUSHI, H
    LIN, PH
    TANAKA, K
    LEXCELLENT, C
    IKAI, A
    [J]. JOURNAL DE PHYSIQUE IV, 1995, 5 (C2): : 409 - 413
  • [8] Superelastic deformation behavior of TiNi shape memory alloy subjected to various cyclic loading
    Dept. of Mech. Eng., Nanjing Univ. of Technol., Nanjing 210009, China
    [J]. Gongneng Cailiao/Journal of Functional Materials, 2002, 33 (04): : 391 - 393
  • [9] Superelastic deformation behaviors based on phase transformation bands in TiNi shape memory alloy
    Pieczyska, Elzbieta A.
    Tobushi, Hisaaki
    Gadaj, Stefan P.
    Nowacki, Wojciech K.
    [J]. MATERIALS TRANSACTIONS, 2006, 47 (03) : 670 - 676
  • [10] Superelastic Deformation of TiNi Shape Memory Alloy Subjected to Various Sub loop Loadings
    Takeda, Kohei
    Tobushi, Hisaaki
    Miyamoto, Kouji
    Pieczyska, Elzbieta Alicja
    [J]. MATERIALS TRANSACTIONS, 2012, 53 (01) : 217 - 223