Toward synergistic performance of integrated wind-solar hybrid energy harvesting structures

This paper considers aerodynamic interactions among an array of tensioned ribbon energy harvesters capable of harvesting both wind and solar energy. Each harvester consists of a thin-film solar cell ribbon supported in tension by a pair of piezoelectric bimorph beams in an inverted-U configuration. These ribbons experience aeroelastic flutter when subjected to crossflow, and the energy from these vibrations can be harvested through the piezoelectric beams. The effect of wind speed on the interaction between two fluttering inverted U-shaped aeroelastic energy harvesters configured in a tandem array was investigated, as previous work suggests that synergistic wake interactions can occur between multiple fluttering energy harvesters. An experimental apparatus was constructed and two thin-film solar ribbons were placed in tandem at a fixed separation distance. Each ribbon was given an applied pre-tension, and wind tunnel testing was performed for a range of wind speeds between 7.5 m/s and 12.5 m/s for each ribbon when fluttering in isolation and when fluttering in tandem. Tandem array efficiency was calculated from the experimental data, and it was determined that there is a wind speed at which peak tandem array efficiency (significantly greater than unity) occurs. It was found that this peak corresponds to the wind speed at which constructive interference due to frequency lock between the two fluttering ribbons begins. Results also show tandem efficiency benefits in both the downstream and upstream harvester, as opposed to previous results that show benefits primarily in the downstream harvester. It is hypothesized that these upstream benefits are due to possible base excitations in the apparatus that have been transmitted by the downstream harvester.