Fabrication and oxidation behavior of Cr2AlC coating on Ti6242 alloy

被引：112

作者：

Wang, Q. M. ^{[1
,2
]}

Renteria, A. Flores ^{[1
]}

Schroeter, O. ^{[1
]}

Mykhaylonka, R. ^{[1
]}

Leyens, C. ^{[1
]}

Garkas, W. ^{[1
]}

to Baben, M. ^{[3
]}

机构：

[1] Brandenburg Tech Univ Cottbus, D-03046 Cottbus, Germany

[2] Acad Sinica, Inst Met Res, Div Surface Engn Mat, Shenyang 110015, Peoples R China

[3] Rhein Westfal TH Aachen, D-52074 Aachen, Germany

来源：

SURFACE & COATINGS TECHNOLOGY | 2010年 / 204卷 / 15期

基金：

美国国家科学基金会;

关键词：

Cr2AlC coating; MAX-phase; Near-alpha titanium alloy; Oxidation; HIGH-TEMPERATURE OXIDATION; M(N+1)AX(N) PHASES; THIN-FILMS; TI3SIC2; MICROSTRUCTURE; DEPOSITION; STABILITY; TI2ALC;

D O I：

10.1016/j.surfcoat.2010.01.002

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

An similar to 5 mu m Cr2AlC coating was synthesized on near-a titanium alloy Ti6242 using an industrially sized magnetron sputtering coater. Isothermal oxidation at 700 degrees C and 800 degrees C, and cyclic oxidation at 700 degrees C of the bare alloys and coated specimens were investigated in air. The results indicated that the Ti6242 alloy faced serious oxidation problems at 700 degrees C and 800 degrees C. Repeated formation and spallation of the multilayered oxide scale on the Ti6242 alloy occurred during oxidation testing. The coated specimens exhibited much better oxidation behaviour as compared to the bare alloy. A continuous Al-rich oxide scale formed on the coating surface during the initial oxidation stages. The oxide scale and coating itself acted as diffusion barriers blocking the further ingress of oxygen and protected the substrate alloy from oxidation. The oxidation mechanisms of the bare alloy and the coated specimens were investigated based on the experimental results. (C) 2010 Elsevier BM. All rights reserved.

引用

页码：2343 / 2352

页数：10

共 50 条

[1] Improving the high-temperature oxidation resistance of a β-γ TiAl alloy by a Cr2AlC coating
Wang, Q. M.
Mykhaylonka, R.
Renteria, A. Flores
Zhang, J. L.
Leyens, C.
Kim, K. H.
CORROSION SCIENCE, 2010, 52 (11) : 3793 - 3802
[2] A Critical Review of the Oxidation of Ti2AlC, Ti3AlC2 and Cr2AlC in Air
Tallman, Darin J.
Anasori, Babak
Barsoum, Michel W.
MATERIALS RESEARCH LETTERS, 2013, 1 (03): : 115 - 125
[3] Fabrication and properties of Cr2AlC ceramics
State Key Lab. of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Acad. of Sci., Shanghai 200050, China
不详
Wuji Cailiao Xuebao, 2007, 1 (189-192):
[4] Fabrication and properties of Cr2AlC ceramics
Tian Wu-Bian
Wang Pei-Ling
Zhang Guo-Jun
Kan Yan-Mei
Li Yong-Xiang
JOURNAL OF INORGANIC MATERIALS, 2007, 22 (01) : 189 - 192
[5] Oxidation and cracking behaviors of triple-layered Cr2AlC coating
Li, Jingjing
Xiang, Huimin
Xu, Jingjun
Zheng, Lili
Qian, Yuhai
SURFACE & COATINGS TECHNOLOGY, 2021, 422
[6] In situ Coating and Hot Corrosion Behavior of Cr2AlC MAX Phase
Zakeri-Shahroudi, Fatemeh
Ghasemi, Behrooz
Abdolahpour, Hassan
Razavi, Mansour
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (12) : 5846 - 5858
[7] On the fracture behavior of Cr2AlC coatings
Voelker, B.
Stelzer, B.
Mraz, S.
Ruess, H.
Sahu, R.
Kirchlechner, C.
Dehm, G.
Schneider, J. M.
MATERIALS & DESIGN, 2021, 206
[8] Bonding and oxidation protection of Ti2AlC and Cr2AlC for a Ni-based superalloy
Sokol, Maxim
Yang, Jian
Keshavan, Hrishikesh
Barsoum, Michel W.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2019, 39 (04) : 878 - 882
[9] Fine Analysis of Microstructure Evolution of Ti6242 Alloy
Zhou Yi
Cao Jingxia
Sui Nan
Zhang Mingda
Tan Qiming
Ding Jianshan
Huang Xu
RARE METAL MATERIALS AND ENGINEERING, 2020, 49 (03) : 907 - 915
[10] Microstructure evolution and cyclic oxidation performance of Cr2AlC as active diffusion barrier for NiCrAlY coating on TiAl alloy
Li, Yang
Ma, Ke
Xu, Jingjun
Li, Jingjing
Li, Yueming
Zhang, Yi
Zuo, Jun
Li, Meishuan
CORROSION SCIENCE, 2024, 226

← 1 2 3 4 5 →