Fast synthesis of permanent magnet assisted synchronous reluctance motors

被引:51
|
作者
Bianchi, Nicola [1 ]
Mahmoud, Hanafy [1 ,2 ]
Bolognani, Silverio [1 ]
机构
[1] Univ Padua, Dept Ind Engn, I-35131 Padua, Italy
[2] Cairo Univ, Elect Power & Machines Dept, Giza 12613, Egypt
关键词
permanent magnet motors; reluctance motors; rotors; geometry; design engineering; demagnetisation; fast permanent magnet assisted synchronous reluctance motor synthesis; motor geometry; magnetic considerations; mechanical considerations; maximum outer space; maximum available length; existing stator lamination; rotor geometry design; demagnetisation limit; TORQUE RIPPLE REDUCTION; SENSORLESS CONTROL; DESIGN; ROTOR; MACHINES; MINIMIZATION;
D O I
10.1049/iet-epa.2015.0240
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
This paper describes a procedure for a practical synthesis of both a synchronous reluctance motor and a permanent magnet assisted synchronous reluctance motor. The procedure is completely analytical, yielding a rapid drawing of the motor geometry, taking into account both magnetic and mechanical considerations. From the application requirements, the external volume of the motor is computed. The further practical needs, such as maximum outer space, maximum available length, existing stator lamination, and so on are considered. Then, the design of the rotor geometry is carried out. The PM size is determined considering the demagnetisation limit according to the maximum current loading.
引用
收藏
页码:312 / 318
页数:7
相关论文
共 50 条
  • [1] Permanent Magnet Volume Minimization in Permanent Magnet Assisted Synchronous Reluctance Motors
    Carraro, Enrico
    Degano, Micheie
    Bianchi, Nicola
    2013 8TH INTERNATIONAL CONFERENCE AND EXHIBITION ON ECOLOGICAL VEHICLES AND RENEWABLE ENERGIES (EVER), 2013,
  • [2] Position sensorless control of permanent magnet assisted synchronous reluctance motors
    Guglielmi, P
    Pastorelli, M
    Pellegrino, G
    Vagati, A
    2003 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-3: CROSSROADS TO INNOVATIONS, 2003, : 933 - 939
  • [3] Synchronous Reluctance and Interior Permanent Magnet Motors
    Bianchi, Nicola
    2013 IEEE WORKSHOP ON ELECTRICAL MACHINES DESIGN, CONTROL AND DIAGNOSIS (WEMDCD), 2013,
  • [4] Design of Permanent Magnet-Assisted Synchronous Reluctance Motors Made Easy
    Talebi, Salman
    Niazi, Peyman
    Toliyat, Hamid A.
    CONFERENCE RECORD OF THE 2007 IEEE INDUSTRY APPLICATIONS CONFERENCE FORTY-SECOND IAS ANNUAL MEETING, VOLS. 1-5, 2007, : 2242 - +
  • [5] Comparison of Permanent-Magnet Assisted Synchronous Reluctance Motors with Different Rotor Structures
    Boztas, Gullu
    Aydogmus, Omur
    2019 11TH INTERNATIONAL CONFERENCE ON ELECTRICAL AND ELECTRONICS ENGINEERING (ELECO 2019), 2019, : 166 - 171
  • [6] Permanent magnet synchronous motors using primarily reluctance torque
    Morimoto, Shigeo
    Awata, Hideya
    Sanada, Masayuki
    Takeda, Yoji
    Electrical Engineering in Japan (English translation of Denki Gakkai Ronbunshi), 2001, 134 (03): : 60 - 68
  • [7] Permanent magnet synchronous motors using primarily reluctance torque
    Morimoto, S
    Awata, H
    Sanada, M
    Takeda, Y
    ELECTRICAL ENGINEERING IN JAPAN, 2001, 134 (03) : 60 - 68
  • [8] Low-Cost Ferrite Permanent Magnet Assisted Synchronous Reluctance Rotor and Permanent Magnet Synchronous Rotor with Flux Concentrator an Alternative for rare Earth Permanent Magnet Synchronous Motors
    Musuroi, S.
    Sorandaru, C.
    Greconici, M.
    Olarescu, V. N.
    Weinman, M.
    2014 INTERNATIONAL CONFERENCE ON APPLIED AND THEORETICAL ELECTRICITY (ICATE), 2014,
  • [9] Low-Cost Ferrite Permanent Magnet Assisted Synchronous Reluctance Rotor an Alternative Solution for Rare Earth Permanent Magnet Synchronous Motors
    Musuroi, S.
    Sorandaru, C.
    Greconici, M.
    Olarescu, V. N.
    Weinman, M.
    39TH ANNUAL CONFERENCE OF THE IEEE INDUSTRIAL ELECTRONICS SOCIETY (IECON 2013), 2013, : 2966 - 2970
  • [10] A permanent magnet-assisted synchronous reluctance motor
    1600, John Wiley and Sons Inc. (142):