Effect of High-Alumina Nanotechnogenic Petrochemical Wastes on the Heat Resistance of Clinker Brick

被引：3
|
作者：
Kairakbaev, A. K. [1 ]
Abdrakhimova, E. S. [2 ]
Abdrakhimov, V. Z. [3 ]
机构：
[1] Kazakh Russian Int Univ, Aktobe, Kazakhstan
[2] SP Korolev Natl Res Univ, SP Korolev Samara State Aerosp Univ, SGAU, Samara, Russia
[3] Samara State Econ Univ, Samara, Russia
来源：
GLASS AND CERAMICS | 2016年 / 72卷 / 9-10期
关键词：
heat-resistance; regression; nanotechnogenic raw material; clinker brick; high-alumina petrochemical wastes; grog addition;
D O I：
10.1007/s10717-016-9786-y
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The use of high-alumina nanotechnogenic raw material as grog was found to be expedient for increasing the heat-resistance of clinker brick. As the content of aluminum oxide Al2O3 in a ceramic body compositions increases, the heat-resistance increases and the CLTE decreases when the clinker brick is fired (1250A degrees C). For Al2O3 content in the ceramic body from 41 to 43% the heat-resistance of the clinker brick reaches its maximum value and ranges from 11 to 13 cycles. Regression analysis was used to obtain a mathematical model to determine the heat-resistance of clinker brick at points that were not present in the experimental series.
引用
收藏
页码：335 / 340
页数：6
相关论文
共 50 条
  • [1] Effect of High-Alumina Nanotechnogenic Petrochemical Wastes on the Heat Resistance of Clinker Brick
    A. K. Kairakbaev
    E. S. Abdrakhimova
    V. Z. Abdrakhimov
    [J]. Glass and Ceramics, 2016, 72 : 335 - 340
  • [2] CREEP CHARACTERISTICS OF SELECTED HIGH-ALUMINA BRICK
    KREGLO, JR
    SMOTHERS, WJ
    [J]. JOURNAL OF METALS, 1967, 19 (07): : 20 - &
  • [3] Refractory Concrete Based on High-Alumina Cement and Clinker Filler
    Yu. R. Krivoborodov
    S. V. Samchenko
    T. V. Kuznetsova
    [J]. Refractories and Industrial Ceramics, 2021, 62 : 153 - 156
  • [4] Refractory Concrete Based on High-Alumina Cement and Clinker Filler
    Krivoborodov, Yu. R.
    Samchenko, S. V.
    Kuznetsova, T. V.
    [J]. REFRACTORIES AND INDUSTRIAL CERAMICS, 2021, 62 (02) : 153 - 156
  • [5] PRODUCTION OF HIGH-ALUMINA CEMENT CLINKER BY FUSION IN AN ELECTRIC FURNACE
    SOROKIN, IN
    GOLOVINA, TM
    RUTMAN, DS
    POPOV, AD
    USTYANTSEV, VM
    PEREPELITSYN, VA
    KHAIROV, TE
    LATYPOVA, NV
    CHERNETA, NI
    GALKIN, MV
    KISELEV, VN
    FADEEV, AE
    [J]. REFRACTORIES, 1984, 25 (5-6): : 293 - 296
  • [6] VOLUME STABILITY OF PHOSPHATE-BONDED HIGH-ALUMINA BRICK
    BAAB, KA
    BLACKWOO.JM
    [J]. AMERICAN CERAMIC SOCIETY BULLETIN, 1971, 50 (07): : 607 - &
  • [7] Innovative shuttle kiln fires high-alumina brick at Rath
    不详
    [J]. AMERICAN CERAMIC SOCIETY BULLETIN, 2005, 84 (03): : 34 - 34
  • [8] MICROANALYSIS OF HIGH-ALUMINA CEMENT CLINKER AND HYDRATED HAC SLAG MIXTURES
    RAYMENT, DL
    MAJUMDAR, AJ
    [J]. CEMENT AND CONCRETE RESEARCH, 1994, 24 (02) : 335 - 342
  • [9] THERMAL-CONDUCTIVITY OF FIRECLAY AND HIGH-ALUMINA REFRACTORY BRICK
    CHIEN, YT
    LEE, TF
    KO, YC
    [J]. AMERICAN CERAMIC SOCIETY BULLETIN, 1982, 61 (07): : 718 - 724
  • [10] Refractory concretes with additives of fine-milled high-alumina industrial wastes
    Abyzov, V
    Kononova, V
    [J]. INTERNATIONAL CONFERENCE ON CONSTRUCTION, ARCHITECTURE AND TECHNOSPHERE SAFETY (ICCATS 2018), 2018, 451
12345