Improved plasticity of Mg-Al-Zn alloy by electropulsing tension

被引：47
|
作者：
Xu, Qing [1 ]
Guan, Lei [1 ]
Jiang, Yanbin [1 ]
Tang, Guoyi [1 ]
Wang, Shaonan [1 ]
机构：
[1] Tsinghua Univ, Grad Sch Shenzhen, Adv Mat Inst, Shenzhen 518055, Peoples R China
来源：
MATERIALS LETTERS | 2010年 / 64卷 / 09期
基金：
中国国家自然科学基金;
关键词：
Magnesium alloys; Electropulsing; Mechanical properties; Microstructure; Dynamic recrystallization; AGED MG-9AL-1ZN ALLOY; DYNAMIC RECRYSTALLIZATION; MAGNESIUM ALLOYS; DEFORMATION; BEHAVIOR; MICROSTRUCTURE; TEMPERATURE; MECHANISMS; PHASE; STRIP;
D O I：
10.1016/j.matlet.2010.02.017
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effect of electropulsing tension (ET) on the elongation to failure and microstructure of Mg-3A1-1Zn (AZ31) alloy was studied. It was found that electropulsing increased the elongation to failure dramatically at a high strain rate of 2.5 x 10(-2) s(-1), compared with the non-ET sample. The mechanism for increasing the elongation was proposed mainly based on dynamic recrystallization (DRX). The results in this investigation indicated that an ideal improvement in plasticity and fine equiaxial grains were obtained at a low temperature and a high strain rate due to the coupling of the thermal and athermal effects of ET. It is different from conventional theories. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：1085 / 1087
页数：3
相关论文
共 50 条
  • [1] Improved tension-compression performance of Mg-Al-Zn alloy processed by co-extrusion
    He, Junjie
    Jiang, Bin
    Xie, Hongmei
    Jiang, Zhongtao
    Liu, Bo
    Pan, Fusheng
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 675 : 76 - 81
  • [2] Continuous casting of semisolid Mg-Al-Zn alloy
    Motegi, T
    Yano, E
    Wada, N
    Tamura, AY
    [J]. MAGNESIUM ALLOYS 2003, PTS 1 AND 2, 2003, 419-4 : 605 - 610
  • [3] Influence of Precipitation on Twinning in a Mg-Al-Zn Alloy
    Hidalgo-Manrique, P.
    Robson, J. D.
    [J]. THERMEC 2018: 10TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2018, 941 : 1041 - 1046
  • [4] Vibration behavior of light metals: Al-Zn alloy and Mg-Al-Zn alloy
    Hung, Fei-Yi
    Lui, Truan-Sheng
    Chen, Li-Hui
    Chang, Han-Wen
    Chen, Zong-Fu
    [J]. JOURNAL OF MATERIALS SCIENCE, 2007, 42 (13) : 5020 - 5028
  • [5] Effect of Al and Zn content on the preparation of semisolid Mg-Al-Zn magnesium alloy
    Zhang, Qianqian
    Chen, Weirong
    [J]. MATERIALS, MECHANICAL AND MANUFACTURING ENGINEERING, 2014, 842 : 27 - 30
  • [6] Influence of extrusion methods on microstructure of Mg-Al-Zn alloy
    Cai, Yun
    Li, Guirong
    Yuan, Xueting
    Wang, Hongming
    Zhao, Yutao
    Wang, Junjie
    [J]. RECENT HIGHLIGHTS IN ADVANCED MATERIALS, 2014, 575-576 : 402 - +
  • [7] Sintering of Mg-Al-Zn alloy prepared by powder rolling
    Huang, Guang-Sheng
    Zhang, Zhong-Wei
    Huang, Guang-Jie
    Wang, Ling-Yun
    [J]. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 2009, 19 (04): : 601 - 606
  • [8] Fatigue behaviors and microstructures in an extruded Mg-Al-Zn alloy
    Somekawa, Hidetoshi
    Maruyama, Norio
    Hiromoto, Sachiko
    Yamamoto, Akiko
    Mukai, Toshiji
    [J]. MATERIALS TRANSACTIONS, 2008, 49 (03) : 681 - 684
  • [9] Improved ductility of aged Mg-9Al-1Zn alloy strip by electropulsing treatment
    Jiang, Yanbin
    Tang, Guoyi
    Shek, Chanhung
    Zhu, Yaohua
    Guan, Lei
    Wang, Shaonan
    Xu, Zhuohui
    [J]. JOURNAL OF MATERIALS RESEARCH, 2009, 24 (05) : 1810 - 1814
  • [10] EFFECT OF HPT PROCESSING TEMPERATURE ON STRENGTH OF A Mg-Al-Zn ALLOY
    Huang, Yi
    Figueiredo, Roberto B.
    Langdon, Terence G.
    [J]. REVIEWS ON ADVANCED MATERIALS SCIENCE, 2012, 31 (02) : 129 - 137
12345