Analysis of Stress Intensity Factor for Interfacial Crack in Bonded Dissimilar Plate under Bending

被引：0
|
作者：
Kakuno, Hatsuki [1 ]
Oda, Kazuhiro [1 ]
Morisaki, Tetsuya [1 ]
机构：
[1] Tokuyama Coll Technol, Yamaguchi 7458585, Japan
来源：
ADVANCES IN FRACTURE AND DAMAGE MECHANICS VIII | 2010年 / 417-418卷
关键词：
Stress Intensity Factor; Finite Element Method; Interface Crack; Bending Specimen;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents the simple method to determine the complex stress intensity factor of interface crack in hi-material plate under bending. In the present method, the stress values at the crack tip calculated by HEM are used and the stress intensity factors of interface crack are evaluated from the ratio of stress values between a given and a reference problems. A single interface crack in an infinite bi-material plate subjected to tension and shear is selected as the reference problem in this study. The accuracy of the present analysis is discussed through the results obtained by body force method. As the result, it is confirmed that the present method is useful for analyzing the interface crack under bending.
引用
收藏
页码：153 / 156
页数：4
相关论文
共 50 条
  • [1] Mode III stress intensity factors in an interfacial crack in dissimilar bonded materials
    A.R. Shahani
    Archive of Applied Mechanics, 2006, 75 : 405 - 411
  • [2] Mode III stress intensity factors in an interfacial crack in dissimilar bonded materials
    Shahani, AR
    ARCHIVE OF APPLIED MECHANICS, 2006, 75 (6-7) : 405 - 411
  • [3] Stress intensity factor of an edge interface crack in a bonded finite plate subjected to bending under arbitrary material combination
    Lan, Xin
    Michinaka, Kengo
    Noda, Nao-Aki
    Zhang, Yu
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2012, 78 (785): : 14 - 22
  • [4] Stress intensity factor of an edge interface crack in a bonded finite plate under arbitrary material combination subjected to bending
    Department of Mechanical Engineering, Kyushu Institute of Technology, 1-1 Sensui-Cho, Tobata-Ku, Kitakyushu-Shi, Fukuoka, 804-8550, Japan
    Takase, Y. (takase@mech.kyutech.ac.jp), Japan Society of Mechanical Engineers (78):
  • [5] Stress intensity factor for an edge crack in two bonded dissimilar materials under convective cooling
    Rizk, A. A.
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2008, 49 (03) : 251 - 267
  • [6] Stress intensity factor for a kinked interfacial crack in dissimilar anisotropic materials under antiplane deformation
    H. G. Beom
    C. B. Cui
    S. Lin
    Archive of Applied Mechanics, 2012, 82 : 963 - 976
  • [7] Stress intensity factor for a kinked interfacial crack in dissimilar anisotropic materials under antiplane deformation
    Beom, H. G.
    Cui, C. B.
    Lin, S.
    ARCHIVE OF APPLIED MECHANICS, 2012, 82 (07) : 963 - 976
  • [8] Stress intensity factor of an interface crack in a bonded plate under uni-axial tension
    Noda N.-A.
    Zhang Y.
    Lan X.
    Takase Y.
    Oda K.
    Nihon Kikai Gakkai Ronbunshu, A Hen/Transactions of the Japan Society of Mechanical Engineers, Part A, 2010, 76 (772): : 1587 - 1595
  • [9] Effect of constraints on stress intensity factor for dissimilar metal plate with centre crack under uniform tension
    Kumaran, M. Muthu
    Murthy, A. Ramachandra
    Vishnuvardhan, S.
    MATERIALS TODAY COMMUNICATIONS, 2020, 22
  • [10] Stress intensity factors for moving interfacial crack between bonded dissimilar fixed orthotropic layers
    Das, S
    Patra, B
    COMPUTERS & STRUCTURES, 1998, 69 (04) : 459 - 472
12345