ERROR MODELING OF STATIC ENERGY METERS

被引：0

作者：

Carobbi, Carlo ^{[1
]}

Pellicci, Guido ^{[2
]}

Vieri, Simone ^{[1
]}

机构：

[1] Univ Firenze, Dep Elect & Telecommun, Florence, Italy

[2] Firenze Tecnol, Florence, Italy

来源：

XIX IMEKO WORLD CONGRESS: FUNDAMENTAL AND APPLIED METROLOGY, PROCEEDINGS | 2009年

关键词：

energy meters; measurement accuracy; Measuring Instruments Directive;

D O I：

暂无

中图分类号：

TH7 [仪器、仪表];

学科分类号：

0804 ; 080401 ; 081102 ;

摘要：

The scope here is to derive a model of the measurement error of static energy meters. The model proposed is based on three error parameters: gain, phase and bias error. The validity of the model is confirmed through the statistical analysis of the measurement results obtained during the calibration of a commercial energy meter, compliant with the Measuring Instruments Directive 2004/22/EC. The experiments also involved operating conditions of the meter beyond those required by the calibration procedure prescribed by the relevant standards. A further analysis is offered aimed at verifying the statistical significance of the parameters of the model.

引用

页码：820 / 824

页数：5

共 50 条

[1] STATIC ENERGY METERS
KEEN, GHD
ELECTRONICS AND POWER, 1974, 20 (14): : 576 - 578
[2] Conducted EMI causing Error Readings of Static Electricity Meters
Rietveld, G.
Hoogenboom, D.
Acanski, M.
2018 CONFERENCE ON PRECISION ELECTROMAGNETIC MEASUREMENTS (CPEM 2018), 2018,
[3] What Should Be Measured Using Static Energy Meters
Masnicki, Romuald
Mindykowski, Janusz
2018 INTERNATIONAL CONFERENCE AND EXPOSITION ON ELECTRICAL AND POWER ENGINEERING (EPE), 2018, : 183 - 188
[4] Static Energy Meters and the Electrical Environment Comply to the Standards But are Not Compatible
Have B.T.
Hartman T.
Moonen N.
Leferink F.
IEEE Electromagnetic Compatibility Magazine, 2023, 12 (01) : 59 - 68
[5] Discussion of the Error Adjustment Methods of the Electromechanical Electric Energy Meters
Sun, Xiaoyun
2016 3RD INTERNATIONAL CONFERENCE ON MANAGEMENT INNOVATION AND BUSINESS INNOVATION (ICMIBI 2016), PT 2, 2016, 58 : 547 - 551
[6] Harmonic Distortion as an Influence Quantity on Reactive Static Electrical Energy Meters
Vasconcellos, M. T.
Luna, J. H. M.
Mateus, J. C.
Portugal, S. A.
VII BRAZILIAN CONGRESS ON METROLOGY (METROLOGIA 2013), 2015, 575
[7] Interference on Static Energy Meters Resulting From Droop of the Current Transformer
ten Have, Bas
Bolzonella, Leonardo
Hartman, Tom
Moonen, Niek
Leferink, Frank
IEEE TRANSACTIONS ON ELECTROMAGNETIC COMPATIBILITY, 2023, 65 (05) : 1343 - 1350
[8] The metrological characterization of the static meters for reactive energy in the presence of harmonic distortion
Cataliotti, Antonio
Cosentino, Valentina
Nuccio, Salvatore
2007 IEEE INSTRUMENTATION & MEASUREMENT TECHNOLOGY CONFERENCE, VOLS 1-5, 2007, : 1370 - 1375
[9] Inclination of Fast Changing Currents Effect the Readings of Static Energy Meters
Ten Have, Bas
Hartman, Tom
Moonen, Niek
Leferink, Frank
2019 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC EUROPE 2019), 2019, : 208 - 213
[10] Monitoring of Power Measured by Static Energy Meters for Observing EMI Issues
ten Have, Bas
Keyer, Cees
Leferink, Frank
2018 INTERNATIONAL SYMPOSIUM ON ELECTROMAGNETIC COMPATIBILITY (EMC EUROPE), 2018, : 903 - 907

← 1 2 3 4 5 →