Adaptation Trajectory in Five Axes Machine to Manufacture Orthopedic Prostheses

被引：1
|
作者：
Azzam, Noureddine [1 ,2 ]
Boukebbab, Salim [1 ,2 ]
Chaves-Jacob, Julien [2 ]
Linares, Jean-Marc [2 ]
机构：
[1] Univ Constantine 1, Fac Sci & Technol, Dept Engn Transport, Rd Ain El Bey, Constantine 25000, Algeria
[2] Aix Marseille Univ, CNRS, ISM, UMR 7287, F-13288 Marseille 9, France
来源：
INTERNATIONAL CONFERENCE OF COMPUTATIONAL METHODS IN SCIENCES AND ENGINEERING 2014 (ICCMSE 2014) | 2014年 / 1618卷
关键词：
Toolpath generation; Prosthesis; ICP algorithm; 5-axes machining; TOOL-PATH GENERATION; REGISTRATION; INSPECTION; ALGORITHM; SURFACES;
D O I：
10.1063/1.4897822
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
A new method of generation and adaptation of multi-axis machines ultrasonic machining paths, geometric change in gross machining is proposed in this paper. Currently, these are in most machining time are done manually by highly trained operators. The proposed method starts with a first step of association using an Iterative Closest Point "ICP" algorithm. In the second step, a deforming toolpath is given. To validate the theoretical developments, experimental tests were carried out for a uni-compartmental femoral knee component.
引用
收藏
页码：639 / 642
页数：4
相关论文
共 50 条
  • [1] Kinematic Simulation of Novel Five Axes Serial-Parallel Machine Tool
    San, HongJun
    Zhong, ShiSheng
    Wang, ZhiXing
    2010 INTERNATIONAL CONFERENCE ON MANAGEMENT SCIENCE AND ENGINEERING (MSE 2010), VOL 5, 2010, : 490 - 493
  • [2] Error measurement method for rotation axes of five-axis machine tool based on machine vision
    Sun, H. (scdx2013@163.com), 1600, Chinese Society of Agricultural Machinery (44):
  • [3] PIGEs Identification of Rotary Axes Based on PIGEs Influences on Their Owner Rotary Axes for the Five-Axis Machine Tool
    Fu, Guoqiang
    Lin, Kunlong
    Zheng, Yue
    Zhu, Sipei
    Lu, Caijiang
    Wang, Xi
    IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, 2025, 74
  • [4] Identification and compensation of geometric errors of rotary axes on five-axis machine by on-machine measurement
    Bi, Qingzhen
    Huang, Nuodi
    Sun, Chao
    Wang, Yuhan
    Zhu, Limin
    Ding, Han
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2015, 89 : 182 - 191
  • [5] Smooth trajectory generation for five-axis machine tools
    Yuen, Alexander
    Zhang, Ke
    Altintas, Yusuf
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2013, 71 : 11 - 19
  • [6] Geometric Error Analysis and Compensation of Rotary Axes of Five-axis Machine Tools
    Guo S.
    Zhang D.
    Zhang, Dongsheng (zdsxjtul1974@gmail.com), 1600, Sichuan University (52): : 130 - 139
  • [7] Double ballbar test for the rotary axes of five-axis CNC machine tools
    Lei, W. T.
    Sung, M. P.
    Liu, W. L.
    Chuang, Y. C.
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (02): : 273 - 285
  • [8] Ballbar dynamic tests for rotary axes of five-axis CNC machine tools
    Lei, Wei-Tai
    Wang, Wen-Chung
    Fang, Tien-Ching
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2014, 82-83 : 29 - 41
  • [9] Geometric error calibration and analysis of rotary axes on a five-axis dispensing machine
    Yin, Song
    Zhou, Haibo
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2024, 238 (09) : 1293 - 1302
  • [10] Geometric Error Measurement of Rotary Axes on Five-Axis Machine Tools: A Review
    Chen, Yu-Ta
    Liu, Chien-Sheng
    Shiau, Wen-Chi
    Xie, Hao-Feng
    Chiu, Chun-Li
    Yan, Qing-Hsien
    Lee, Bo-Kuan
    Chen, Ting-Han
    Huang, Yu-Yang
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2024, 25 (06) : 1311 - 1332
12345