Effects of solidification rate, Fe, and Ca on the cast microstructure of aluminum alloy A356

被引：0
|
作者：
Anyalebechi, PN [1 ]
机构：
[1] Grand Valley State Univ, LV Eberhard Ctr, Grand Rapids, MI 49504 USA
来源：
LIGHT METALS 2003 | 2003年
关键词：
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of solidification rate, Fe, and Ca on the characteristics of the constituent phases formed during solidification of aluminum alloy A356 have been investigated. This involved the use of unidirectionally cooled laboratory-size ingots with a range of solidification rate of 0.2-7.5 K/s. Two levels of Fe (0.05 wt.% and 0.20 wt.%) and Ca (0 ppm and 59 ppm) were investigated. Both average dendrite cell and constituent phase particle size decreased exponentially with increase in solidification rate. At the levels investigated, Ca and Fe did not have any statistically significant effect on the volume fractions and characteristics of the constituent phases.
引用
收藏
页码：1005 / 1015
页数：11
相关论文
共 50 条
  • [1] Effects of hydrogen, solidification rate, and Ca on porosity formation in as-cast aluminum alloy A356
    Anyalebechi, PN
    LIGHT METALS 2003, 2003, : 971 - 981
  • [2] High strain rate effects on cast A356 aluminum alloy
    Horstemeyer, MF
    Mosher, DA
    ADVANCES IN ALUMINUM CASTING TECHNOLOGY, 1998, : 149 - 150
  • [3] Microstructure analysis of freeze-cast A356 aluminum alloy
    Yang H.-Q.
    Shan Z.-D.
    Liu F.
    Wang Y.-F.
    Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2022, 44 (08): : 1331 - 1337
  • [4] Simulation of the aluminum alloy A356 solidification cast in cylindrical permanent molds
    Bencomo, A.
    Bisbal, R.
    Morales, R.
    MATERIA-RIO DE JANEIRO, 2008, 13 (02): : 294 - 303
  • [5] Effects of High-Temperature Solutionizing on Microstructure and Tear Toughness of A356 Cast Aluminum Alloy
    Harada, Yohei
    Tamura, Shinichi
    Kumai, Shinji
    MATERIALS TRANSACTIONS, 2011, 52 (05) : 848 - 855
  • [6] Effect of Pressure on Microstructure and Cooling Curves of A356 Aluminum Alloy During Solidification
    Ali Fardi-Ilkhchy
    Behzad Binesh
    Mehdi Shaban Ghazani
    Transactions of the Indian Institute of Metals, 2019, 72 : 2319 - 2327
  • [7] MICROSTRUCTURE SIMULATION IN PRESSURIZED SOLIDIFICATION DURING SQUEEZE CASTING OF ALUMINUM ALLOY A356
    Li, Yanda
    Han, Zhiqiang
    Luo, Alan A.
    Sachdev, Anil K.
    Liu, Baicheng
    TMS 2012 141ST ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 2: MATERIALS PROPERTIES, CHARACTERIZATION, AND MODELING, 2012, : 339 - 346
  • [8] Effect of Pressure on Microstructure and Cooling Curves of A356 Aluminum Alloy During Solidification
    Fardi-Ilkhchy, Ali
    Binesh, Behzad
    Shaban Ghazani, Mehdi
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2019, 72 (09) : 2319 - 2327
  • [9] Evolution of Solidification Microstructure of A356 Aluminum Alloy Treated by Pulse Magnetic Field
    Song, Zhiqi
    Zhao, Xudong
    Wang, Jun
    Hu, Chaosheng
    Liu, Yongzhen
    Ma, Yonglin
    Cailiao Daobao/Materials Reports, 2024, 38 (13):
  • [10] Effect of power ultrasound on solidification of aluminum A356 alloy
    Jian, X
    Xu, H
    Meek, TT
    Han, Q
    MATERIALS LETTERS, 2005, 59 (2-3) : 190 - 193
12345