Determination of Shock Standoff Distance for Wedge at Supersonic Flow

被引:0
|
作者
Mishra, A. [1 ]
Khan, A. [2 ]
Mazlan, N. Musfirah [2 ]
机构
[1] IIT Kanpur, Dept Aerosp Engn, Kanpur, Uttar Pradesh, India
[2] Univ Sains Malaysia, Sch Aerosp Engn, Engn Campus, George Town, Malaysia
来源
INTERNATIONAL JOURNAL OF ENGINEERING | 2019年 / 32卷 / 07期
关键词
Flow Channel; Shock Standoff; Supersonic Flow; Wedge; BOW SHOCK; CYLINDER; NUMBER; FIELD;
D O I
10.5829/ije.2019.32.07a.19
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
An experimental investigation is conducted to calculate the shock standoff (SSO) distance in front of an acute-angled wedge. For this experimentation, simple water flows channel analysis is carried out. The flow velocity is varied from 13.2 cm/s to 25.5 cm/s increasing in steps of 1 cm/s. A velocity of 13.2 cm/s corresponds to Froude number 1.13 and velocity of 25.5 cm/s to Froude number 1.41. The Froude number ranged from 1.13 to 1.41 in steps of 0.04. The study is conducted on 5 mm thick acrylic sheets and of wedge angles 50 degrees, 60 degrees, and 75 degrees to obtain a relation for calculating the SSO distance concerning the Froude number. It is found that the pressure uphill strongly depends upon the Fr and wedge angle. The SSO distance determined experimentally and using the proposed correlation are found to be in good agreement.
引用
收藏
页码:1049 / 1056
页数:8
相关论文
共 50 条