Mechanical characteristics and pore evolution of red sandstone under ultrasonic high-frequency vibration excitation

被引:13
|
作者
Zhang, Lei [1 ]
Wang, Xufeng [1 ,2 ]
Wang, Jiyao [1 ]
Yang, Zhanbiao [3 ]
机构
[1] China Univ Min & Technol, Sch Mines, Jiangsu Engn Lab Mine Earthquake Monitoring & Pre, Xuzhou 221116, Jiangsu, Peoples R China
[2] China Univ Min & Technol, State Key Lab Coal Resources & Safe Min, Xuzhou 221116, Jiangsu, Peoples R China
[3] China Pingmei Shenma Grp, State Key Lab Coking Coal Exploitat & Comprehens, Pingdingshan 467000, Peoples R China
基金
中国国家自然科学基金;
关键词
FATIGUE PROPERTIES; ROCK; DAMAGE; SIMULATION; SAMPLES;
D O I
10.1063/5.0051640
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Ultrasonic vibration rock breaking is a new type of rock breaking technology. By studying the mechanical properties of red sandstone under ultrasonic vibration, the mechanical behavior and damage mechanism of rock under the impact of high-frequency vibration can be revealed more comprehensively from macro- and microscopic standpoints. In this paper, the cylindrical red sandstone specimen is used as the study object subjected to vibration excitation via the ultrasonic vibration device. The change in the mechanical parameters of red sandstone specimens is analyzed via a single-axial compression test. The red sandstone specimens are vibrated to study the effects of high-frequency vibration on their natural frequency. The latter's natural frequency is measured using the knocking method, while the micro-disruption characteristics of the red sandstone are observed via electron microscopy. The T-2 spectrum, aperture distribution, porosity, and nuclear magnetic resonance image (MRI) evolution characteristics of red sandstone specimens are obtained via nuclear magnetic resonance technology. The results show that ultrasonic vibration deteriorates the red sandstone compressive strength and elastic modulus by 55.3% and 26.9%, respectively, after 120 s of excitation. Under ultrasonic vibration excitation, the rock specimen's natural frequency is reduced by 2.4% due to its mass and elastic modulus variation. Many transgranular cracks are generated in the sandstone, splitting the crystal nucleus into smaller blocks. The generation of new micropores is observed in the T-2 spectrum, and the maximum increase in the dimensions of micropores and mesopores at the two peaks is 58.7% and 4.67%, respectively. The variation trend of rock specimen porosity is completely consistent with the variation in micropores' content. MRI images indicate that the microcrack aggregation occurs in the edge area of the contact surface between the exciter and rock.
引用
收藏
页数:10
相关论文
共 50 条
  • [1] Mesoscopic Damage and Fracture Characteristics of Hard Rock under High-Frequency Ultrasonic Vibration Excitation
    Zhang, Lei
    Wang, Xufeng
    Niu, Zhijun
    APPLIED SCIENCES-BASEL, 2023, 13 (22):
  • [2] Experimental Study on Failure Law and Mechanism of Red Sandstone under Ultrasonic Vibration Excitation
    Wang, Jiyao
    Wang, Xufeng
    Chen, Xuyang
    Chen, Liang
    Yang, Zhanbiao
    Chang, Zechao
    Zhang, Lei
    Niu, Zhijun
    GEOFLUIDS, 2022, 2022
  • [3] Vibration and Noise Characteristics of Nanocrystalline Cores Under High-Frequency and Non-Sinusoidal Excitation
    Dou, Yu
    Li, Yongjian
    Chen, Tao
    Liu, Xueqing
    Zhu, Jianguo
    IEEE TRANSACTIONS ON MAGNETICS, 2024, 60 (09) : 1 - 1
  • [4] Evolution of Pore Structure and Fractal Characteristics in Red Sandstone under Cyclic Impact Loading
    Qiao, Huanhuan
    Wang, Peng
    Jiang, Zhen
    Liu, Yao
    Tian, Guanglin
    Zhao, Bokun
    FRACTAL AND FRACTIONAL, 2024, 8 (08)
  • [5] Microcrack Growth Properties of Granite under Ultrasonic High-Frequency Excitation
    Zhao, Dajun
    Zhang, Shulei
    Wang, Meiyan
    ADVANCES IN CIVIL ENGINEERING, 2019, 2019
  • [6] Microstructure evolution characterization of GH4169 superalloy under ultrasonic high-frequency vibration energy
    Chang, Baoqi
    Yi, Zhaoxi
    Duan, Ji-an
    Zhang, Fen
    Gong, Da
    Kang, Tao
    MATERIALS CHARACTERIZATION, 2023, 198
  • [7] High-frequency ultrasonic atomization with pulsed excitation
    Lozano, A
    Amaveda, H
    Barreras, F
    Jordá, X
    Lozano, M
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2003, 125 (06): : 941 - 945
  • [8] Numerical Simulation of Rock Vibration Response under Ultrasonic High-Frequency Vibration with High Confining Pressure
    Wang, Minsheng
    Xuan, Lingchao
    Liu, Weikai
    Feng, Jinyu
    Wang, Heng
    PROCESSES, 2024, 12 (07)
  • [9] WELDING CHARACTERISTICS OF ULTRASONIC WIRE BONDING USING HIGH-FREQUENCY VIBRATION SYSTEMS
    TSUJINO, J
    MORI, T
    HASEGAWA, K
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1994, 33 (5B): : 3048 - 3053
  • [10] Welding characteristics of ultrasonic wire bonding using high-frequency vibration systems
    Tsujino, Jiromaru, 1600, JJAP, Minato-ku, Japan (33):