Improvement of output Voltage Waveform for ARCP Matrix Converter

被引：0
|
作者：
Hatase, Takanori [1 ]
Abe, Takashi [1 ]
Higuchi, Tsuyoshi [1 ]
Hara, Hideaki [2 ]
机构：
[1] Nagasaki Univ, 1-14 Bunkyou Machi, Nagasaki, Japan
[2] Yaskawa elect Corp, Fukuoka, Japan
来源：
EPE: 2009 13TH EUROPEAN CONFERENCE ON POWER ELECTRONICS AND APPLICATIONS, VOLS 1-9 | 2009年
关键词：
Matrix Converter; AC/AC Converter; Soft Switching; Pulse Width Modulation;
D O I：
暂无
中图分类号：
TP301 [理论、方法];
学科分类号：
081202 ;
摘要：
A Matrix Converter (MC) is an AC-to-AC conversion device that can generate variable magnitude and frequency output voltage. The higher carrier frequency is selected for more accurate and low acoustic noise. However, using a high carrier frequency causes new problems, such as the increase of switching loss and premature breakdown of power device. Therefore, the auxiliary resonant commutated pole (ARCP) is applied to a MC and ARCPMC has been proposed. This paper shows how the method intended for improvement of the output voltage waveform for ARCPMC was verified using the system simulation and confirmed through experimental results.
引用
收藏
页码：3259 / +
页数：3
相关论文
共 50 条
  • [1] Output Characteristics of ARCP Matrix Converter at Wide Output Command Range
    Hamamoto, Koji
    Abe, Takashi
    Higuchi, Tsuyoshi
    [J]. 2012 15TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS 2012), 2012,
  • [2] Improvement of output voltage using six-phase matrix converter
    Ortega, Manuel
    Jurado, Francisco
    [J]. 2008 IEEE INTERNATIONAL CONFERENCE ON EMERGING TECHNOLOGIES AND FACTORY AUTOMATION, PROCEEDINGS, 2008, : 524 - 529
  • [3] Loss Evaluation for ARCP Matrix Converter
    Nagafuchi, Syotaro
    Abe, Takashi
    Higuchi, Tsuyoshi
    [J]. 2013 IEEE 10TH INTERNATIONAL CONFERENCE ON POWER ELECTRONICS AND DRIVE SYSTEMS (IEEE PEDS 2013), 2013, : 608 - 612
  • [4] Output voltage compensation for matrix converter
    State Key Laboratory of Control and Simulation of Power Systems and Generation Equipment, Department of Electrical Engineering, Tsinghua University, Beijing 100084, China
    [J]. Qinghua Daxue Xuebao, 2007, 7 (1113-1117): : 1113 - 1117
  • [5] Output Voltage Estimation for Matrix Converter
    Bauer, J.
    [J]. 2017 INTERNATIONAL CONFERENCE ON APPLIED ELECTRONICS (AE), 2017, : 15 - 18
  • [6] Improvement of output voltage control performance for low speed operation of matrix converter
    Hara, H
    Yamamoto, E
    Kang, JK
    Kume, T
    [J]. PESC 04: 2004 IEEE 35TH ANNUAL POWER ELECTRONICS SPECIALISTS CONFERENCE, VOLS 1-6, CONFERENCE PROCEEDINGS, 2004, : 2910 - 2916
  • [7] Improvement of output voltage control performance for low-speed operation of matrix converter
    Hara, H
    Yamamoto, E
    Kang, JK
    Kume, T
    [J]. IEEE TRANSACTIONS ON POWER ELECTRONICS, 2005, 20 (06) : 1372 - 1378
  • [8] Matrix Converter Output Voltage Control with Overmodulation
    Lettl, J.
    Fligl, S.
    [J]. PIERS 2009 MOSCOW VOLS I AND II, PROCEEDINGS, 2009, : 375 - 379
  • [9] Analysis of output waveform distortions of matrix converter and compensation method
    He, Bi
    Lin, Hua
    She, Hong-Wu
    Wang, Xing-Wei
    Zhang, Xiao-Feng
    [J]. Zhongguo Dianji Gongcheng Xuebao/Proceedings of the Chinese Society of Electrical Engineering, 2010, 30 (12): : 28 - 35
  • [10] Application of ARCP matrix converter to AC/DC conversion
    Oyama, J
    Higuchi, T
    Abe, T
    Matsuba, S
    Teichmann, R
    [J]. PCC-OSAKA 2002: PROCEEDINGS OF THE POWER CONVERSION CONFERENCE-OSAKA 2002, VOLS I - III, 2002, : 1061 - 1066
12345