A 3D Voronoi clump based model for simulating failure behavior of brittle rock

被引:36
|
作者
Wang, Zhaohui [1 ]
Yang, Shengli [2 ]
Li, Lianghui [1 ]
Tang, Yuesong [1 ]
Xu, Guoliang [2 ]
机构
[1] China Univ Min & Technol, Sch Energy & Min Engn, Beijing 100083, Peoples R China
[2] Coal Ind Engn Res Ctr Top Coal Caving Min, Beijing 100083, Peoples R China
基金
中国国家自然科学基金; 国家重点研发计划;
关键词
Discrete element method; Voronoi tessellation; Rock fracturing behavior; UCS-to-TS ratio; Strength envelope; GRAIN-BASED MODELS; PARTICLE MODEL; SYNTHETIC ROCK; MICROCRACKING BEHAVIOR; COMPRESSION TESTS; SHEAR BEHAVIOR; DAMAGE; FRACTURE; STRENGTH; MASS;
D O I
10.1016/j.engfracmech.2021.107720
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
Particle-based model (PBM) has been extensively used to investigate progressive failure process of rock due to its advantage in modeling fracture development. In order to make the PBM reproduce rock failure behavior more realistically, this study develops an advanced clumped particle model for rock based on 3D Voronoi tessellation (VCPM). In the newly developed model, irregular clumps are identified by using an ergodic algorithm similar with that adopted by the Voronoi tessellation. Thus, structural similarity between convex clumps and Voronoi cells is guaranteed while computational efficiency of the clump logic is remained by the VCPM. The clump size and coordination number of the VCPM obey Inverse Gaussian and Gaussian distributions, respectively. Such characteristics enable the VCPM to simulate rock micro-cracking and macrofracturing behaviors even in large-scale engineering problems. A comprehensive parametric study indicates both micro-geometric and micro-mechanical properties have significant influences on macro-mechanical properties of the VCPM. Linear or nonlinear mode of the predicted strength envelope can be controlled by the average particle number involved in the clump. Based on the revealed relationship between macro-mechanical responses and micro-properties, a calibration procedure is moreover established for the VCPM. The calibrated VCPM is then applied to simulate failure behavior of Lac du Bonnet granite to investigate its modeling capability. The predicted stress-strain response and strength envelope are in good accordance to the experimental data. The large magnitudes of the UCS-to-TS ratio and strength envelope slope imply the interlocking effect is greatly strengthened in the VCPM. In addition, the influences of the minor principal stress on the ductility, volumetric dilation and failure pattern of the granite as well as its splitting failure in the Brazilian test are also accurately captured by the VCPM. Such capabilities indicate the VCPM is of great potential in further investigation of rock fracturing behavior under more complex stress environment.
引用
收藏
页数:21
相关论文
共 50 条
  • [1] A 3D Grain-Based Model for Simulating the Micromechanical Behavior of Salt Rock
    Li, Huan
    Ma, Hongling
    Shi, Xilin
    Zhou, Jun
    Zhang, Haina
    Daemen, J. J. K.
    ROCK MECHANICS AND ROCK ENGINEERING, 2020, 53 (06) : 2819 - 2837
  • [2] A 3D Grain-Based Model for Simulating the Micromechanical Behavior of Salt Rock
    Huan Li
    Hongling Ma
    Xilin Shi
    Jun Zhou
    Haina Zhang
    J. J. K. Daemen
    Rock Mechanics and Rock Engineering, 2020, 53 : 2819 - 2837
  • [3] A 3D Voronoi and subdivision model for calibration of rock properties
    Zhu, De-Fu
    Tu, Shi-Hao
    Ma, Hang-sheng
    Zhang, Xin-wang
    MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING, 2017, 25 (08)
  • [4] Numerical Simulation of Rock Failure Process with a 3D Grain-Based Rock Model
    Zhang, Zengwei
    Chen, Fan
    Zhang, Chao
    Wang, Chao
    Wang, Tuo
    Zhang, Fengshou
    Zhao, Huiling
    ADVANCES IN CIVIL ENGINEERING, 2020, 2020
  • [5] 3D anisotropic elastoplastic-damage model and its application in simulating the behavior of rock materials
    Zhang Junfeng
    Qi Tao
    FRACTURE AND DAMAGE MECHANICS V, PTS 1 AND 2, 2006, 324-325 : 579 - +
  • [6] Failure mechanism of brittle rock with 3D parallel preset flaws based on the particle displacement trend method
    Zhao, Yusong
    Li, Binglei
    Wu, Shunchuan
    Chen, Long
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2022, 117
  • [7] Failure mechanism of brittle rock with 3D parallel preset flaws based on the particle displacement trend method
    Zhao, Yusong
    Li, Binglei
    Wu, Shunchuan
    Chen, Long
    Theoretical and Applied Fracture Mechanics, 2022, 117
  • [8] 3D simulation of mechanised excavation in brittle rock
    Zhao Kai
    Janutolo, Michele
    Chen Guoxing
    ADVANCES IN CIVIL AND INDUSTRIAL ENGINEERING, PTS 1-4, 2013, 353-356 : 1724 - +
  • [9] Simulating progressive failure in brittle jointed rock masses using a modified elastic-brittle model and the application
    Fu, Jin-Wei
    Zhang, Xin-Zhong
    Zhu, Wei-Shen
    Chen, Kui
    Guan, Jun-Feng
    ENGINEERING FRACTURE MECHANICS, 2017, 178 : 212 - 230
  • [10] 3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided micro-fracturing
    Ghazvinian, E.
    Diederichs, M. S.
    Quey, R.
    JOURNAL OF ROCK MECHANICS AND GEOTECHNICAL ENGINEERING, 2014, 6 (06) : 506 - 521