Application of lock-in thermography non destructive technique to CFC armoured plasma facing components

被引：12
|
作者：
Escourbiac, F. [1 ]
Constans, S. [1 ]
Courtois, X. [1 ]
Durocher, A. [1 ]
机构：
[1] CEA Cadarache, DRFC SIPP, Dept Rech Fus Controlee, Assoc Euratom CEA,DSM, F-13108 St Paul Les Durance, France
来源：
JOURNAL OF NUCLEAR MATERIALS | 2007年 / 367卷
关键词：
D O I：
10.1016/j.jnucmat.2007.04.033
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A non destructive testing technique - so called modulated photothermal thermography or lock-in thermography - has been set-up for plasma facing components examination. Reliable measurements of phase contrast were obtained on 8 mm carbon fiber composite (CFC) armoured W7-X divertor component with calibrated flaws. A 3D finite element analysis allowed the correlation of the measured phase contrast and showed that a 4 mm strip flaw can be detected at the CFC/ copper interface. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码：1492 / 1496
页数：5
相关论文
共 50 条
  • [1] Non-destructive evaluation of bonded structures with lock-in thermography
    Meola, C
    Carlomagno, GM
    Giorleo, L
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2003, 17 (09) : 1207 - 1222
  • [2] Non-destructive evaluation of bonded structures with lock-in thermography
    Meola, C., 1600, Taylor and Francis Ltd. (17):
  • [3] Non-destructive evaluation of aerospace materials with lock-in thermography
    Meola, C
    Carlomagno, GM
    Squillace, A
    Vitiello, A
    ENGINEERING FAILURE ANALYSIS, 2006, 13 (03) : 380 - 388
  • [4] Non-destructive evaluation of bonded structures with lock-in thermography
    Meola, C. (carmeola@unina.it), 1600, VSP BV (17):
  • [5] Development of laser lock-in thermography for plasma facing component surface characterisation
    Courtois, X.
    Sortais, C.
    Melyukov, D.
    Gardarein, J. L.
    Semerok, A.
    Grisolia, Ch.
    FUSION ENGINEERING AND DESIGN, 2011, 86 (9-11) : 1714 - 1718
  • [6] Non-destructive control of industrial materials by means of lock-in thermography
    Meola, C
    Carlomagno, GM
    Squillace, A
    Giorleo, G
    MEASUREMENT SCIENCE AND TECHNOLOGY, 2002, 13 (10) : 1583 - 1590
  • [7] Non-destructive evaluation of aircraft structure using lock-in thermography
    Bai, WM
    Wong, BS
    NONDESTRUCTIVE EVALUATION OF AGING AIRCRAFT, AIRPORTS, AND AEROSPACE HARDWARE IV, 2000, 3994 : 37 - 46
  • [8] Lock-in infrared thermography for the non-destructive testing of fatigue specimen with defects
    Zhao Y.
    Guo X.
    Ren M.
    Guangxue Xuebao/Acta Optica Sinica, 2010, 30 (10): : 2776 - 2781
  • [9] Recent development toward the use of infrared thermography as a non destructive technique for defect detection in tungsten plasma facing components
    Richou, M.
    Escourbiac, F.
    Missirlian, M.
    Vignal, N.
    Cantone, V.
    Riccardi, B.
    JOURNAL OF NUCLEAR MATERIALS, 2011, 417 (1-3) : 581 - 585
  • [10] Lock-in Infrared Thermography for the Non-destructive Testing of Fatigue Specimen with Defects
    Zhao, Yanguang
    Guo, Xinglin
    Ren, Mingfa
    FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE, PTS 1-4, 2011, 44-47 : 576 - 580
12345