Impact of Downsizing Technology on Operating Indicators for Combustion Engine Fed with Gaseous Fuel with Low Methane Content

被引:0
|
作者
Sroka, Zbigniew J. [1 ]
机构
[1] Wroclaw Univ Technol, Fac Mech Engn, Inst Machine Design & Operat, PL-50370 Wroclaw, Poland
来源
关键词
internal combustion engine; methane; downsizing;
D O I
暂无
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Mine gases, in which the power factor is given by methane, have different chemical compositions and physical properties. These gases can be fuels for internal combustion engines. The diversity of gas parameters combined with downsizing, which is a trend in the development of internal combustion engines, is the foundation of this project, for which the research problem has been defined as an assessment of the impact of lowmethane fuel on engine operating indicators. It has been shown to be possible to use a methane-downsized engine instead of gasoline by the application of high-energy fuel with methane content higher than 60%. The results have been obtained by modeling engine cycles, hence the next step in research will be testing on real objects.
引用
收藏
页码:1413 / 1416
页数:4
相关论文
共 29 条
  • [1] The technique for Simulation of Transient Combustion Processes in the Rocket Engine Operating with Gaseous Fuel "Hydrogen and Oxygen"
    Zubanov, V. M.
    Stepanov, D. V.
    Shabliy, L. S.
    INTERNATIONAL CONFERENCE ON INFORMATION TECHNOLOGIES IN BUSINESS AND INDUSTRY 2016, 2017, 803
  • [2] Impact of engine control variables on low load combustion efficiency and exhaust emissions of a methane-diesel dual fuel engine
    Khedkar, Nikhil D.
    Sarangi, Asish K.
    Sreedhara, Sheshadri
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2024, 238 (14) : 4551 - 4568
  • [3] Impact of Spray Cone Angle on the Performances of Methane/Diesel RCCI Engine Combustion under Low Load Operating Conditions
    Hamdi, Fathi
    Agrebi, Senda
    Idrissi, Mohamed Salah
    Mondo, Kambale
    Labiadh, Zeineb
    Sadiki, Amsini
    Chrigui, Mouldi
    ENTROPY, 2022, 24 (05)
  • [4] Gaseous fuel injection assisted with rich hydrogen content in turbojet engine for enhanced thrust and combustion efficiency
    Sekar, Manigandan
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2024, 78 : 564 - 571
  • [5] Effects of engine operating parameters on diesel low-temperature combustion with split fuel injection
    Sarangi, Asish K.
    Garner, Colin P.
    McTaggart-Cowan, Gordon P.
    Davy, Martin H.
    Wahab, Emad
    Peckham, Mark S.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2012, 226 (D9) : 1271 - 1286
  • [6] ZERO-DIMENSIONAL 2-PHASE COMBUSTION MODEL IN A DUAL-FUEL COMPRESSION IGNITION ENGINE FED WITH GASEOUS FUEL AND A DIVIDED DIESEL FUEL CHARGE
    Mikulski, Maciej
    Wierzbicki, Slawomir
    Pietak, Andrzej
    EKSPLOATACJA I NIEZAWODNOSC-MAINTENANCE AND RELIABILITY, 2015, 17 (01): : 42 - 48
  • [7] Comprehensive kinetic study of combustion technologies for low environmental impact: MILD and OXY-fuel combustion of methane
    Bagheri, Ghobad
    Ranzi, Eliseo
    Pelucchi, Matteo
    Parente, Alessandro
    Frassoldati, Alessio
    Faravelli, Tiziano
    COMBUSTION AND FLAME, 2020, 212 : 142 - 155
  • [8] AN ALTERNATIVE CALCULATION FOR METHANE NUMBER FOR LEAN BURN SPARK IGNITED ENGINES OPERATING ON LOW ENERGY CONTENT GASEOUS FUELS
    Xu, Hui
    zur Loye, Axel O.
    Bremmer, Robin J.
    PROCEEDINGS OF THE ASME INTERNAL COMBUSTION ENGINE FALL TECHNICAL CONFERENCE, 2017, VOL 1, 2017,
  • [9] Assessment of the exergy, emissions, and combustion characteristics of a diesel engine operating on low-glyceride biodiesel blended with diesel fuel
    Zapata-Mina, Juan
    Restrepo, Alvaro
    Tibaquira, Juan Esteban
    CASE STUDIES IN THERMAL ENGINEERING, 2023, 41
  • [10] The Impact of Fuel Injection Timing and Charge Dilution Rate on Low Temperature Combustion in a Compression Ignition Engine
    Sarangi, Asish K. K.
    McTaggart-Cowan, Gordon P. P.
    Garner, Colin P. P.
    ENERGIES, 2023, 16 (01)