Operation of a proton exchange membrane fuel cell under non-humidified conditions using a membrane-electrode assemblies with composite membrane and electrode

被引:16
|
作者
Vengatesan, Singaram [1 ]
Kim, Hyoung-Juhn [1 ]
Lee, Sang-Yeop [1 ]
Cho, EunAe [1 ]
Ha, Heung Yong [1 ]
Oh, In-Hwan [1 ]
Lim, Tae-Hoon [1 ]
机构
[1] Korea Inst Sci & Technol, Fuel Cell Res Ctr, Seoul 136791, South Korea
关键词
composite membrane and electrode; membrane-electrode assembly; non-humidified operation; polymer electrolyte membrane fuel cell; silica; water retention;
D O I
10.1016/j.jpowsour.2007.02.047
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Composite membranes with hydrophilic substances can retain water and allow the operation of proton exchange membrane fuel cells (PEMFCs) under non-humidified conditions. In this work, thin Nafion composite membranes with silica are prepared to operate a PEMFC with dry fuel and oxidant. In addition, the role of silica in the catalyst layer as a water retainer is studied. In particular, the anode and the cathode are modified separately to elucidate the effect of silica. The incorporation of silica in the membrane and the catalyst layer enhances single-cell performance under non-humidified operation. The cell performance of membrane-electrode assemblies using the composite membrane and electrode is higher than that of a MEA using commercial Nafion 111 membrane under non-humidified conditions. (c) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:325 / 329
页数:5
相关论文
共 50 条
  • [1] Membrane-Electrode Assemblies with Patterned Electrodes for Proton-exchange Membrane Fuel Cells
    Song, Chan-Ho
    Park, Jin-Soo
    [J]. CHEMISTRY LETTERS, 2018, 47 (02) : 196 - 199
  • [2] Physico-chemical study of the degradation of membrane-electrode assemblies in a proton exchange membrane fuel cell stack
    Ferreira-Aparicio, P.
    Gallardo-Lopez, B.
    Chaparro, A. M.
    Daza, L.
    [J]. JOURNAL OF POWER SOURCES, 2011, 196 (09) : 4242 - 4250
  • [3] Protic plastic crystal/PVDF composite membranes for Proton Exchange Membrane Fuel Cells under non-humidified conditions
    Diaz, M.
    Ortiz, A.
    Pringle, J. M.
    Wang, X.
    Vijayaraghavan, R.
    MacFarlane, D. R.
    Forsyth, M.
    Ortiz, I.
    [J]. ELECTROCHIMICA ACTA, 2017, 247 : 970 - 976
  • [4] Preparation of membrane electrode assemblies for proton exchange membrane fuel cells
    Clean Energy Automotive Engineering Center, Tongji University, Shanghai 201804, China
    不详
    不详
    [J]. Jixie Gongcheng Xuebao, 2009, 2 (75-80): : 75 - 80
  • [5] Improved membrane and electrode assemblies for proton exchange membrane fuel cells
    Iyuke, SE
    Mohamad, AB
    Kadhum, AAH
    Daud, WRW
    Rachid, C
    [J]. JOURNAL OF POWER SOURCES, 2003, 114 (02) : 195 - 202
  • [6] A review of the performance and analysis of proton exchange membrane fuel cell membrane electrode assemblies
    Liu, Chao-Yang
    Sung, Chia-Chi
    [J]. JOURNAL OF POWER SOURCES, 2012, 220 : 348 - 353
  • [7] Multidimensional nanostructured membrane electrode assemblies for proton exchange membrane fuel cell applications
    Wang, Guoliang
    Zou, Liangliang
    Huang, Qinghong
    Zou, Zhiqing
    Yang, Hui
    [J]. JOURNAL OF MATERIALS CHEMISTRY A, 2019, 7 (16) : 9447 - 9477
  • [8] High performance proton exchange membrane fuel cell electrode assemblies
    Yang, Tien-Fu
    Hourng, Lih-Wu
    Yu, T. Leon
    Chi, Pei-Hung
    Su, Ay
    [J]. JOURNAL OF POWER SOURCES, 2010, 195 (21) : 7359 - 7369
  • [9] Gradient Membrane Electrode of Proton Exchange Membrane Fuel Cell
    Zheng, Junsheng
    Dai, Ningning
    Wang, Qianqian
    Zhu, Shiyao
    Zheng, Jianping
    [J]. Tongji Daxue Xuebao/Journal of Tongji University, 2018, 46 : 228 - 236
  • [10] Novel membrane electrode assembly (MEA) fabrication for PEMFC operations under non-humidified conditions
    Lee, S. -Y.
    Kim, H-J
    Kim, K. -H.
    Cho, E.
    Oh, I. -H.
    Lim, T. -H.
    [J]. IFOST 2006: 1ST INTERNATIONAL FORUM ON STRATEGIC TECHNOLOGY, PROCEEDINGS: E-VEHICLE TECHNOLOGY, 2006, : 202 - +