Influence of cooling rate on hot ductility of C-Mn-Al and C-Mn-Nb-Al steels

被引：0
|
作者：
Abushosha, R [1 ]
Ayyad, S [1 ]
Mintz, B [1 ]
机构：
[1] City Univ London, Dept Mech & Aeronaut Engn, London EC1V 0HB, England
来源：
MATERIALS SCIENCE AND TECHNOLOGY | 1998年 / 14卷 / 04期
关键词：
D O I：
10.1179/mst.1998.14.4.346
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Tensile samples were cast in situ and cooled to test temperatures in the range 760 to 1100 degrees C, at cooling rates of 25, 60, and 200 K min(-1). In all cases, increasing the cooling rate to that undergone during thin slab casting caused the ductility to deteriorate. For C-Mn-Al steels this deterioration resulted from both a finer AlN precipitation as well as a finer dispersion of sulphides. In the case of C-Mn-Nb-Al steels, the inferior ductility arose because increasing the cooling rate caused more Nb to be held in solution before testing so that more of the detrimental strain induced Nb(CN) precipitation could occur during the test.
引用
收藏
页码：346 / 351
页数：6
相关论文
共 50 条
  • [1] Influence of titanium and nitrogen on hot ductility of C-Mn-Nb-Al steels
    Comineli, O
    Abushosha, R
    Mintz, B
    MATERIALS SCIENCE AND TECHNOLOGY, 1999, 15 (09) : 1058 - 1068
  • [2] Influence of Ti on hot ductility of C-Mn-Al steels
    Abushosha, R
    Comineli, O
    Mintz, B
    MATERIALS SCIENCE AND TECHNOLOGY, 1999, 15 (03) : 278 - 286
  • [3] Influence of Cu alloying on hot ductility of C-Mn-Al and Ti-Nb microalloyed steels
    Comineli, O
    Luo, H
    Liimatainen, HM
    Karjalainen, LP
    REVISTA DE METALURGIA, 2005, : 407 - 411
  • [4] Hot ductility and fracture mechanisms of a C-Mn-Nb-Al steel
    Hurtado-Delgado, E
    Morales, RD
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2001, 32 (05): : 919 - 927
  • [5] Hot ductility and fracture mechanisms of a C-Mn-Nb-Al steel
    E. Hurtado-Delgado
    R. D. Morales
    Metallurgical and Materials Transactions B, 2001, 32 : 919 - 927
  • [6] HOT DUCTILITY OF DIRECTLY CAST C-MN-NB-AL STEEL
    MINTZ, B
    WILCOX, JR
    CROWTHER, DN
    MATERIALS SCIENCE AND TECHNOLOGY, 1986, 2 (06) : 589 - 594
  • [7] THE INFLUENCE OF CYCLIC TEMPERATURE OSCILLATIONS ON PRECIPITATION AND HOT DUCTILITY OF A C-MN-NB-AL STEEL
    MINTZ, B
    STEWART, JM
    CROWTHER, DN
    TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1987, 27 (12) : 959 - 964
  • [8] Influence of undercooling thermal cycle on hot ductility of C-Mn-Al-Ti and C-Mn-Al-Nb-Ti steels
    Spradbery, C
    Mintz, B
    IRONMAKING & STEELMAKING, 2005, 32 (04) : 319 - 324
  • [9] Effect of Austenitization Temperature on Hot Ductility of C-Mn-Al HSLA Steel
    Prislupcak, Peter
    Kvackaj, Tibor
    Bidulska, Jana
    Zahumensky, Pavol
    Homolova, Viera
    Juhar, Lubos
    Zubko, Pavol
    Zimovcak, Peter
    Gburik, Roman
    Demjan, Ivo
    MATERIALS, 2022, 15 (03)
  • [10] HOT DUCTILITY BEHAVIOR OF C-MN-NB-AL STEELS AND ITS RELATION TO CRACK-PROPAGATION DURING THE STRAIGHTENING OF CONCAST STRAND
    MINTZ, B
    ARROWSMITH, JM
    PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 1980, 295 (1413): : 124 - 124
12345