INFLUENCE OF THE RIBS PARALLEL TO WEB ON WARPING AND LOAD-BEARING CAPACITY OF A STEEL I-BEAM

被引：2

作者：

Wierzbicki, Krzysztof ^{[1
]}

Szumigala, Maciej ^{[2
]}

机构：

[1] West Pomeranian Univ Technol, Szczecin, Poland

[2] Poznan Univ Tech, Poznan, Poland

来源：

CIVIL AND ENVIRONMENTAL ENGINEERING REPORTS | 2019年 / 29卷 / 04期

关键词：

warping; lateral-torsional buckling; endplates; ribs; bending;

D O I：

10.2478/ceer-2019-0050

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The article analyses the method of enhancing a steel beam by adding additional steel members like ribs. They are rigidly connected with both flanges in a plane parallel to the web. That plates reduces warping during in-plane bending of steel beam under lateral-torsional bucking. Different thicknesses of steel plates used as ribs and different cross-sections were taken into account. Calculations were conducted using FEM and ABAQUS CAE environment. The outcomes were compared with ones from previous studies which concerned an influence of endplates on load-bearing capacity of an I-beam.

引用

页码：141 / 148

页数：8

共 50 条

[1] INFLUENCE OF BIMOMENT RESTRAINTS ON THE LOAD-BEARING CAPACITY OF A STEEL I-BEAM
Wierzbicki, Krzysztof
[J]. CIVIL AND ENVIRONMENTAL ENGINEERING REPORTS, 2020, 30 (04) : 33 - 47
[2] Influence of Warping on Bearing Capacity of Steel I-Beam with Non-Fork Support
Wierzbicki, Krzysztof
[J]. 3RD WORLD MULTIDISCIPLINARY CIVIL ENGINEERING, ARCHITECTURE, URBAN PLANNING SYMPOSIUM (WMCAUS 2018), 2019, 471
[3] On the influence of the technology of manufacturing on the load-bearing capacity of steel tanks
V. S. Gudramovich
A. F. Demenkov
E. A. Egorov
A. V. Reprintsev
[J]. Strength of Materials, 2006, 38 (4) : 423 - 427
[4] STEEL FOR SPRINGS WITH A HIGH LOAD-BEARING CAPACITY
TSVETOVKA, LG
[J]. SOVIET ENGINEERING RESEARCH, 1983, 3 (10): : 33 - 35
[5] RESEARCH ON THE LOCAL LOAD-BUCKLING CAPACITY OF THE COPED STEEL I-BEAM
Wang, Ling
Chen, Lan
Tu, Wenqing
[J]. INNOVATION & SUSTAINABILITY OF STRUCTURES, VOLS 1 AND 2, 2011, : 1167 - 1171
[6] Experimental research on load-bearing capacity of cast steel joints for beam-to-column
Han, Qinghua
Liu, Mingjie
Lu, Yan
[J]. STRUCTURAL ENGINEERING AND MECHANICS, 2015, 56 (01) : 67 - 83
[7] The influence of the fire source location on the load-bearing capacity of timber beam exposed to fire
Kmiecik, Kamil
[J]. FIRE AND ENVIRONMENTAL SAFETY ENGINEERING 2018 (FESE 2018), 2018, 247
[8] INFLUENCE OF CREEP ON THE LOAD-BEARING CAPACITY OF TIMBER COLUMNS
BLASS, HJ
[J]. HOLZ ALS ROH-UND WERKSTOFF, 1988, 46 (11) : 405 - 411
[9] Calculation Method for Load-carrying Capacity of Cold-formed Steel I-beam
Zhou Xu Hong
Shi Yu
[J]. 3RD INTERNATIONAL FORUM ON ADVANCES IN STRUCTURAL ENGINEERING: ADVANCES IN RESEARCH AND PRACTICE OF STEEL STRUCTURES, 2009, : 287 - 313
[10] Investigations into the shear load-bearing capacity of stainless steel sheets
Ungermann, Dieter
Schweyher, Janik
[J]. STAHLBAU, 2024,

← 1 2 3 4 5 →