Running-in of an artificial rough rolling-sliding contact using Finite Element Analysis

被引：0
|
作者：
Ismail, R. [1 ]
Saputra, E. [2 ]
Jamari, J. [1 ]
Schipper, D. J. [2 ]
机构：
[1] Univ Diponegoro, Dept Mech Engn, Lab Engn Design & Tribol, Tembalang 50275, Semarang, Indonesia
[2] Univ Twente, Fac Engn Technol, Lab Surface Technol & Tribol, NL-7500 AE Enschede, Netherlands
来源：
PROCEEDINGS OF MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015 | 2015年
关键词：
Running-in; rolling-sliding contacts; FEA; SURFACE-TOPOGRAPHY; WEAR;
D O I：
10.5510/OGP20150100236
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
The aim of the present paper is simulating a rolling-sliding contact using finite element analysis (FEA) to analyze the change in surface topography and contact. Finite element simulations are done for the two-disc configuration with an artificial rough surface of a sphere and a smooth cylinder. The results show that the contact pressure reaches a stabilized value after a certain number of rotations, indicating the end of the running-in phase and the beginning of the steady-state phase.
引用
收藏
页码：74 / 75
页数：2
相关论文
共 50 条
  • [1] Transitions in rolling-sliding wheel/rail contact condition during running-in
    Fukagai, S.
    Brunskill, H. P.
    Hunter, A. K.
    Dwyer-Joyce, R. S.
    Lewis, R.
    [J]. TRIBOLOGY INTERNATIONAL, 2020, 149
  • [2] Thermal-mechanical finite element analysis of the rolling-sliding contact with inclusion
    Wang, BK
    Dong, GN
    Xie, YB
    [J]. CONTRIBUTIONS OF SURFACE ENGINEERING TO MODERN MANUFACTURING AND REMANUFACTURING, 2002, : 528 - 531
  • [3] Finite Element Analysis of Damage Evolution of Solid Lubrication Film in Rolling-Sliding Contact
    Lv, Peng
    Tian, Changling
    Xue, Yujun
    Yu, Yongjian
    Cai, Haichao
    Yin, Yanjing
    [J]. LUBRICANTS, 2024, 12 (07)
  • [4] Stress history in rolling-sliding contact of rough surfaces
    Kim, TH
    Olver, AV
    [J]. TRIBOLOGY INTERNATIONAL, 1998, 31 (12) : 727 - 736
  • [5] Experimental and finite element analysis of surface asperity geometry during the running-in phase of rolling contact
    Yusof, Nurul Farhana Mohd
    Ripin, Zaidi Mohd
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2024, 238 (19) : 9698 - 9710
  • [6] Two-Dimensional Finite Element Analysis on Running-in of Elastic-Plastic Rolling Contact
    Ismail, Rifky
    Tauviqirrahman, Muhammad
    Jamari
    Schipper, Dirk J.
    [J]. 4TH ASIAN PHYSICS SYMPOSIUM: AN INTERNATIONAL EVENT, 2010, 1325 : 190 - +
  • [7] Wear induced changes in surface topography during running-in of rolling-sliding contacts
    Sakhamuri, Maruti Sai Dhiraj
    Harvey, Terry J.
    Vierneusel, Bernd
    Wood, Robert J. K.
    [J]. WEAR, 2023, 522
  • [8] Topography transformations due to running-in of rolling-sliding non-conformal contacts
    Hansen, Jonny
    Bjorling, Marcus
    Larsson, Roland
    [J]. TRIBOLOGY INTERNATIONAL, 2020, 144
  • [9] Finite Element Analysis of the Rolling-Sliding Contact of Vibrationally Loaded Bearings based on a Micro Friction Model
    Konrad, Andreas
    Nierlich, Wolfgang
    Gegner, Juergen
    [J]. INTERNATIONAL CONFERENCE ON RESIDUAL STRESSES 9 (ICRS 9), 2014, 768-769 : 714 - +
  • [10] FINITE-ELEMENT ANALYSIS OF THE INFLUENCE OF KINEMATIC HARDENING IN TWO-DIMENSIONAL, REPEATED, ROLLING-SLIDING CONTACT
    HAM, GL
    HAHN, GT
    RUBIN, CA
    BHARGAVA, V
    [J]. TRIBOLOGY TRANSACTIONS, 1989, 32 (03): : 311 - 316
12345